ECOZEN INTERNATIONAL JSC

WHY CHOOSE ECOZEN?

Genuine origin of the goods, all papers provided

Best consulting – before and after sales service

The sales team is experienced and overseas trained

Warranties 1-for-1 exchange. Fast technical service & 24/7. Nationwide for within 24 hours

Diversity of goods, meet large volumes for the project

Competitive price, high discount for large volumes

PRODUCTS SETS

Phụ kiện nhà tắm

Giải pháp IoT

VALVE ADCA

Thermostatic clean steam trap Model TSS6

Model:

Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...

Inverted Bucket Steam Traps Model IB12

Model:

Features Inverted Bucket Steam Traps Model IB12 Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water hammer and vibrations. Easy to maintain. Specification Inverted Bucket Steam Traps Model IB12 SIZES: DN ½” – 3/4” CONNECTIONS: Female screwed ISO7/1 Rp (BS21) Threaded flanges on request INSTALLATION: Horizontal installation See IMI installation and maintenance instructions. PMO...

Inverted Bucket Steam Trap Model IB30S-IB30SS

Model:

Features Inverted Bucket Steam Trap Model IB30S-IB30SS Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water-hammer and vibrations. Easy to maintain. Specification Inverted Bucket Steam Trap Model IB30S-IB30SS SIZES: DN ½” – DN 1” ; DN15 – DN25 CONNECTIONS: Female screwed ISO7/1 Rp (BS21) Flanged EN 1092-1 PN40 or ANSI INSTALLATION: Horizontal installation See...

Inverted Bucket Steam Traps Screw IB30S

Model:

Features Inverted Bucket Steam Traps Screw IB30S Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water-hammer and vibrations. Easy to maintain. Specification Inverted Bucket Steam Traps Screw IB30S SIZES: DN 1.½” – DN 2” ; DN40 – DN50 CONNECTIONS: Female screwed ISO7/1 Rp (BS21) Flanged EN 1092-1 PN25 or ANSI Special flanges on request....

Bẫy hơi gầu đảo Adca IB35SS- Inverted bucket steam traps

Inverted bucket steam traps Model IB35SS

Model:

Features Inverted bucket steam traps Model IB35SS Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water-hammer and vibrations. Easy to maintain. Specification Inverted bucket steam traps Model IB35SS SIZES: IB35S – DN ½” – DN 1”; DN15 – DN25 IB35SS – DN ½” – DN ¾”; DN15 – DN20 CONNECTIONS: Female screwed ISO7/1 Rp...

Thermostatic Steam Trap Model TH21SS, TH21/2SS

Model:

Features Thermostatic Steam Trap Model TH21SS, TH21/2SS Modulating discharge. Discharges condensate close to steam temperature. Thermostats for different sub cooling (5ºK to 30ºK). Excellent air discharge . Operates on moderate superheated steam. Built-in strainer. Specification Thermostatic Steam Trap Model TH21SS, TH21/2SS SIZES: DN ½” to DN 1” ; DN15 to DN25 CONNECTIONS: Female screwed ISO...

Bẫy hơi lưỡng kim Adca BSR22 – -Uniadca sealed bimettalic adjustable trap

Uniadca sealed bimettalic adjustable trap Model: BSR22

Model:

Features Uniadca sealed bimettalic adjustable trap Model: BSR22 External adjustment device Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water-hammer and vibrations. Specification Uniadca sealed bimettalic adjustable trap Model: BSR22 SIZES : DN 1/2” , 3/4” and 1” DN 15, 20 and 25. According to the selected...

Bẫy hơi lưỡng kim Adca BM24- Bimetallic steam traps

Bimetallic steam trap Model BM24

Model:

Features Bimetallic steam trap Model BM24 Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water-hammer and vibrations. Built-in strainer. Specification Bimetallic steam trap Model BM24 SIZES: DN11/2” – DN2”; DN 40 – DN 50 CONNECTIONS: Female screwed BSP or NPT Flanged EN 1092-1 PN40 or ANSI SW...

Pneumatic control valves Model PV926H

Model:

Features Pneumatic control valves Model PV926H Completely made from solid bar stock material. Single seated, two way, direct or reverse action valve. Valve bonnet permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal or soft sealing. Self draining design. Specification Pneumatic control valves Model PV926H Internal wetted parts: ≤...

Manual Blowdown Valve Model VPA26S

Model:

Features Manual Blowdown Valve Model VPA26S High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Manual Blowdown Valve Model VPA26S Manual or automatic control. Size: DN20 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 400ºC Read More: Steam...

Blowdown valve for Boiler Model VPA26

Model:

Features Blowdown valve for Boiler Model VPA26 High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Blowdown valve for Boiler Model VPA26 Read More: Steam Boiler Blowdown Valves

Automatic Blowdown Valve Model VPA26S

Model:

Features Automatic Blowdown Valve Model VPA26S High-quality hardened valve seat and plug. Manual or automatic intermittent timed control. Lockable in open position if supplied with manual operation lever. Practical foot operated lever. Maintenance free stem sealing. Tool-free quick exchangeable clamped-in seats, allowing fast and easy in-site maintenance procedures. Specification Automatic Blowdown Valve Model VPA26S Manual...

Blowdown valve for Boiler VYC Model 460

Model:

Specification Blowdown valve for Boiler VYC Model 460 Size: DN25 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 250ºC Read More: Steam Boiler Blowdown Valves

Electric control valve Model EV25S – EV25G

Model:

Features Electric control valve Model EV25S – EV25G Mixing or diverting purpose control valve. Standard packing or bellows sealed stem sealing. Specification Electric control valve Model EV25S – EV25G Read More: Electric Control Valves

Electric Control Ball Valve Genebre Model 5635

Model:

Specification Electric Control Ball Valve Genebre Model 5635 Size: 1/4″ – 4″ Stainless steel full port ball valve, 3 pieces. Thread ends according to ISO 7-1 (EN 10226-1). Made of stainless steel 1.4408 (CF8M). Ball seats PTFE + 15 % G.F. (please ask for other materials) O’ring in the stem FKM (Viton). Stem gasket PTFE...

Electric Control 3 ways reduced bore ball valve Genebre Model 5641

Model:

Features Electric Control 3 ways reduced bore ball valve Genebre Model 5641 Corrosion Resistant. Fixation ISO 5211. Protection IP-67. Manual Override. Optic indicator of position 2 additional contacts of final of career. Automatic temperature control: An internal 3,5 W thermostatically controlled heater maintains the internal temperature between 20º and 30º C eliminating the damage by...

Pressure Reducing Valve Pilot Model PRV47/2

Model:

Features Pressure Reducing Valve Pilot Model PRV47/2 Robust complete carbon steel construction. Suitable for dead end conditions. Guided piston and valve stem. Hardened plug. Specification Pressure Reducing Valve Pilot Model PRV47/2 Size: DN65 – DN100 Connection: Flange EN1092-1 Working pressure: PN16/ PN40 Maximum operating temperature: 250ºC Solid carbon steel construction Suitable for dead end conditions....

Pressure Reducing Valve Pilot Model PRV47

Model:

Features Pressure Reducing Valve Pilot Model PRV47 Robust complete steel or stainless steel construction. Suitable for dead end conditions. Guided piston and valve stem. Hardened plug. Specification Pressure Reducing Valve Pilot Model PRV47 Size: DN15 – DN50 Connection: Flange EN1092-1 Working pressure: PN40 Maximum operating temperature: 250ºC Solid carbon steel construction Suitable for dead end...

Pressure Reducing Valve Model YPR-1S

Model:

Direct Acting Pressure Reducing Valve Model PRV25/2S

Model:

Features Direct Acting Pressure Reducing Valve Model PRV25/2S Compact design. Bellows specially designed for high durability. Built-in strainer. Specification Direct Acting Pressure Reducing Valve Model PRV25/2S SIZES: ½”, ¾”, 1”; DN15, DN20 and DN25 CONNECTIONS Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. INSTALLATION Horizontal installation. An “Y” strainer should be provided...

Pressure Reducing Valve Model RP45

Model:

Features Pressure Reducing Valve Model RP45 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators. Specification Pressure Reducing Valve Model RP45 Size: DN15 – DN150 CONNECTION RP45G Flanged EN 1092-2 PN16 RP45S or I Flanged EN 1092-1 PN16 – PN40...

Piston Sensing Pressure Reducing Valve Model PRV31SS

Model:

Features Piston Sensing Pressure Reducing Valve Model PRV31SS Compact design. Balanced valve plug. Machined from bar stock materials or investment casting. Specification Piston Sensing Pressure Reducing Valve Model PRV31SS Size: 1/2” and 3/4”; DN15 – DN50 Connection Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40 or PN 63. Flanged ASME B16.5...

Pressure Reducing Valve Model P20P

Model:

Features Pressure Reducing Valve Model P20P Compact design. Machined from barstock materials No rising handwheel Ultrasonically cleaned and degreased Specification Pressure Reducing Valve Model P20P Size: 1/4″ Connection Female screwed ISO7/1Rp(BS 21) or NPT. Special connections on request Working pressure: PN320 Maximum temperature: 80ºC INSTALLATION: In any position Read More: Steam Products ADCA

Diaphragm Sensing Pressure Sustaining Valve PS15SS

Model:

Features Diaphragm Sensing Pressure Sustaining Valve PS15SS Compact design. Machined from barstock materials. Specification Diaphragm Sensing Pressure Sustaining Valve PS15SS Size: DN8 – DN15 Connection Female screwed ISO7/1Rp(BS 21) or NPT. Flanged EN 1092-1 PN16/PN40 Special flanges upon request Working pressure: PN63 Maximum temperature: 80ºC Installation: Horizontal ORDER REQUIREMENTS: Type of fluid Read More: Steam...

Pressure Reducing Valve Model P-130

Model:

Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....

Thermostatic clean steam trap Model TSS6

Model:

Pressure reducing valve Model RP45I ANSI150/300

Model:

Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...

Sanitary pressure reducing valve P160

Model:

Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...

High purity ball valves M3HP True bore

Model:

Features High purity ball valves M3HP True bore True bore floating ball design. Completely made from solid bar stock material. Can be serviced without removal from pipeline. Bidirectional. Anti blow out proof stem. Tube weld with loose body flanges. (360º rotation after installation). ISO 5211 mounting (only sizes ≥1”). Specification High purity ball valves M3HP...

Culinary steam filter ISC16

Model:

Features Culinary steam filter ISC16 Several retention rates available. Good durability against aggressive gases. Porosity level is more than 50% ensuring high particle and dirt load capacity as well as good flow rate at a low differential pressure. Regeneration by ultrasonic bath. Specification Culinary steam filter ISC16 Internal parts: ≤ 0,76 mícron Ra – SF3....

Sample coolers SC32P – SC32PP

Model:

Features Sample coolers SC32P – SC32PP Corrosion-resistant body and internals. Self draining sample (inlet top, outlet bottom). Specification Sample coolers SC32P – SC32PP Internal wetted parts: ≤ 0,51 micron Ra – SF1. External: ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00-Technical information. Ultrasonic cleaning. OPTIONS: Different connection sizes and materials USE: ...

Clean Steam Trap TSS6A

Model:

Features Clean Steam Trap TSS6A Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design. Specification Clean Steam Trap TSS6A OPTIONS: Special designs under request USE: Saturated clean steam. AVAILABLE MODELS: TSS6A Inlet and outlet angle TSS6AI Inlet angle straight outlet TSS6AO Inlet straight outlet angle SIZES: ½” and ¾”. CONNECTIONS: ...

VALVE ZETKAMA

Butterfly valve 494

Model:

Feature Butterfly valve 494 High tightness class – A acc. to EN – 12266 – 1 Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Easy to install EPOXY RAL 5002 150 μm Read more: Butterfly valves

Butterfly valve 495

Model:

Feature Butterfly valve 495 High tightness class – A acc. to EN – 12266 – 1 Vulcanized seat, the possibility of use in systems with vacuum Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Face-to-face dimension according to EN 558 series 20 Epoxy RAAL 5002 150 µm Sealing EPDM/ NBR/ FLUCAST/ SILICONE/...

Butterfly valve 496

Model:

Feature Butterfly valve 496 High tightness class – A acc. to EN – 12266 – 1 Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Face-to-face dimension according to EN 558 series 20 Epoxy RAAL 5002 150 µm Sealing EPDM/ NBR/ FLUCAST/ SILICONE/ VITON/ HYPALON/ EPICHLOROHYDRIN/ NEOPREN/ BUTYL Discs NODULAR CAST IRON/ STAINLESS...

Butterfly valve 497

Model:

Feature Butterfly valve 497 High tightness class – A acc. to EN – 12266 – 1 Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Face-to-face dimension according to EN 558 series 20 EPOXY RAL 5002 150 μm Read more: Butterfly valves

Butterfly valve 498

Model:

Feature Butterfly valve 498 High tightness class – A acc. to EN – 12266 – 1 Tests acc. to EN – 12266 – 1 Flanges drilled according to EN 1092-2 Face-to-face dimension according to EN 558 series 20 Read more: Butterfly valves

Butterfly valve 499

Model:

Feature Butterfly valve 499 High tightness (leakproofness class – A acc. to EN – 12266 – 1 Compact settlement Environment friendly Tests acc. to EN – 12266 – 1 Face-to-face dimension according to EN 558 series 20 EPOXYD RAAL 5002 150mq Sealing EPDM/ NBR/ FLUCAST/ SILICONE/ VITON/ HYPALON/ EPICHLOROHYDRIN/ NEOPRENE/ BUTYL Discs NODULAR CAST IRON/...

Zetkama Bellow valve 234

Model:

Feature Zetkama Bellow valve 234 High thightness (leakproofness class – A acc. EN -12266 – 1) Compact settlement Environment-friendly Tests acc. EN – 12266 – 1 Flanges drilled according to EN 1092-2 for body material A, C Flanges drilled according to EN 1092-1 for body material F Face-to-face dimension according to EN 558-1 series 1...

Zetkama Bellow valve 235

Model:

Features Zetkama stop valve 235 • high tightness (leakproofness class – A acc. EN -12266 – 1) • compact settlement • environment-friendly • tests acc. EN – 12266 – 1 • flanges drilled according to EN 1092-2 • face-to-face dimension according to EN 558 series 8 Specification Zetkama stop valve 235 Material: Cast Iron Size:...

Zetkama Bellow valve 237

Model:

Features Zetkama stop valve 237 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • weld ends according to EN 12627 Specification Zetkama stop valve 237...

Gate valve 111

Model:

Features Gate valve 111 high tightness (leakproofness class – A acc. EN -12266 – 1) face of face dimensions: series 14 acc EN 558-1, F4 acc. to DIN 3202 flange end connections: EN-1092-2 fusion bonded epoxy coating RAL 5002 coating thickness: 300µm prepared for actuator mounting Specification Gate valve 111 Material: Cast Iron Size: DN40...

Gate valve 112

Model:

Features Gate valve 112 • high tightness (leakproofness class – A acc.to EN -12266 – 1) • tests acc. to EN – 12266 – 1 • face of face dimensions: series F5 acc. to DIN 3202 • flange and connections: EN-1092-2, DIN 2501 • fusion bonded polyester coating RAL 5015 or other acc. to customer’s...

Gate valve 021

Model:

Features Gate valve 021 face-to-face length according to PN EN 558:2008 FTF N.14 flanges with faying surfaces (type B1) are drilled according to PN EN 1092-2: for gate valves DN 700 – 1000 are drilled on PN10 for gate valves DN 1200 – 1400 are drilled on PN 2,5 wheel for hand operation can be...

Gate valve 019

Model:

Features Gate valve 019 • face-to-face length according to PN EN 558:2008 FTF N.14 • flanges with faying surfaces (type B) are drilled according to PN EN 1092-2: – for gate valves DN 700 – 1000 are drilled on PN10 – for gate valves DN 1200 – 1400 are drilled on PN2,5 • wheel for...

Zetkama Safety valve 630

Model:

Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...

Zetkama Safety valve 775

Model:

Features Zetkama Safety valve 775 Valves made according to PN EN ISO 4126-1 High tightness Specification Zetkama Safety valve 775 Size: DN20 – DN32 Connection: Threaded Working pressure: PN16 Operating Temperature: -10 ~ 200°C Degree of protection: IP67, IP68 Read More: Zetkama Valves

Zetkama Safety valve 781

Model:

Features Zetkama Safety valve 781 • valves made according to PN EN ISO 4126-1 • high tightness For valve with soft sealing • quiet work of valve • raised tightness of closure • protection of disc sealing surface against limescale settling as well as against any small mechanical dirt Specification Zetkama Safety valve 781 Material:...

Zetkama Safety valve 240

Model:

Features Zetkama Safety valve 240 connection dimensions of flanges PN-EN 1092 • valves produced in accordance with the requirements of PN-EN ISO 4126-1 • a high degree of tightness In the case of valves with soft seals: • quiet operation of the valve • increased tightness of the closure • protection of disc sealing surface...

Zetkama Safety valve 782

Model:

Features Zetkama Safety valve 782 • valves made according to PN EN ISO 4126-1 • high tightness Specification Zetkama Safety valve 782 Material: Bronze Size: DN10 – DN25 Connection: Threaded Working pressure: PN25 Operating Temperature: -30 ~ 120°C Read More: Zetkama Valves

Zetkama Safety valve 570

Model:

Features Zetkama Safety valve 570 • flanges dimension according to PN EN 1092 • valves made according to PN EN ISO 4126-1 • high tightness Specification Zetkama Safety valve 570 Materials: Cast iron, Steel, Acid-resistant cast steel Size: DN20 – DN150 Connection: Flanged Working pressure: PN16, PN40 Maximum temperature: 400ºC Standard: Atex Read More: Zetkama...

Check Valve 407

Model:

Features Check Valve 407 • compact settlement • environment-friendly • no maintenance • allows installation in all positions Specification Check Valve 407 Material: Cast Iron Size: DN40 – DN600 Connection: wafer Working pressure: PN10, PN16 Operating Temperature: -10 ~ 100°C Read More: Check valve

Model:

Model:

Model:

Model:

Model:

Features Check Valve 287 • closing tightness acc. to EN -12334 • compact settlement • environment-friendly • no maintenance • face-to-face dimension according to EN 558-1 series 1 • flanges drilled according to EN 1092-1 for type F • flanges drilled according to EN 1092-2 for type A,C,E Specification Check Valve 287 Materials: Gray cast...

Check Valve 277

Model:

Features Check Valve 277 • closing tightness acc. to EN -12334 • compact settlement • environment-friendly • no maintenance Specification Check Valve 277 Material: Gray cast iron Size: DN15 – DN50 Connection: ren Maximum pressure: PN16 Operating Temperature: -10 ~ 200°C Read More: Check valve

Check Valve 275

Model:

Features Check Valve 275 • compact settlement • environment-friendly • no maintenance • tests acc. to EN 12266-1 class D • face-to-face dimension according to EN 558 series 49 (DN15 – DN100) Specification Check Valve 275 Materials: Brass, Stainless Steel Size: DN15 – DN300 Maximum pressure: PN40 Operating Temperature: -10 ~ 300°C Read More: Check...

Static balancing valve 447

Model:

Features Static balancing valve 447 High tightness (leakproofness class – A acc. to EN -12266 – 1) Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Flanges drilled according to EN 1092-2 Flanges ANSI drilled according to ASME B 16.1 class 125 Face-to-face dimension according to EN 558 series 1 Read more: Zetkama...

Static balancing valve 221

Model:

Features Static balancing valve 221 High tightness (leakproofness class – A acc. to EN – 12266-1) High reliability measurement of differential pressure at calibrated Venturi orifice Kvs Ergonomic handwheel with exact setting scale Environment-friendly Setting lock possibility Face to face dimension (M4 series acc. to DIN 3202) Read more: Zetkama Valves

Static balancing valve 224

Model:

Static balancing valve 223

Model:

Strainer 823

Model:

Feature Strainer 823 Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Screen made of stainless steel Cleaning of screen without disassembling Read more:Zetkama Valves

Strainer 821

Model:

Feature Strainer 821 Screen made of stainless steel (from DN 50 with reinforced ring, from DN 150 with supporting basket) Compact settlement Environment-friendly Cleaning of screen without disassembling Face-to-face dimension according to EN 558 series 1 Flanges drilled according to EN 1092-1 for body material F Flanges drilled according to EN 1092-2 for body material...

VALVE GENEBRE

Pneumatic Control 3 ways ball valve Genebre Model 5040

Model:

Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...

Pneumatic Control Ball Valve Genebre Model 5025

Model:

Pneumatic Control Ball Valve Genebre Model 5025 Material: Stainless Steel Size: DN15 – DN50 Connection: Threaded Maximum pressure: 63bar Operating Temperature: -25 ~ 180ºC Read More: Pneumatic control valves

Electric Control Ball Valve Genebre Model 5635

Model:

Wafer type 1 Pc full bore ball valve with heating chamber Mounting between flanges

Model:

Referencia Size Weight (Kg) Box / carton 2119 04 V. ESFERA PASO TOTAL 1-PZ C/C. CALEFACCION PN-16 1/2″ 1.5 1/1 2119 05 V. ESFERA PASO TOTAL 1-PZ C/C. CALEFACCION PN-16 3/4″ 1.9 1/1 2119 06 V. ESFERA PASO TOTAL 1-PZ C/C. CALEFACCION PN-16 1″ 2.6 1/1 2119 07 V. ESFERA PASO TOTAL 1-PZ C/C. CALEFACCION...

Wafer type. 1 pc full bore ball valve mounting between flanges

Model:

Referencia Size Weight (Kg) Box / carton 2118 04 WAFER 1PC FULL BORE B.V.1/2″ 1.235 9/18 2118 05 WAFER 1PC FULL BORE B.V.3/4″ 1.57 8/16 2118 06 WAFER 1PC FULL BORE B.V.1″ 1.92 6/12 2118 07 WAFER 1PC FULL BORE B.V.1″1/4 BETWEEN FLANGES PN-16 3.552 1/8 2118 08 WAFER 1PC FULL BORE B.V.1″1/2 BETWEEN FLANGES...

Wafer type. 1 pc full bore ball valve with heating chamber mounting between flanges

Model:

Referencia Size Weight (Kg) Box / carton 2115 06 1PC FULL BORE BALL VALVE HEATING CHAMBER FLANGES PN16 1″ 4.2 1/1 2115 07 MOUNTING BETWEEN FLANGES PN16 5.5 1/1 2115 08 MOUNTING BETWEEN FLANGES PN16 6.8 1/1 2115 09 MOUNTING BETWEEN FLANGES PN16″ 8.5 1/1 2115 10 1PC FULL BORE BALL VALVE HEATING CHAMBER FLANGES...

Wafer type. 1 pc full bore ball valve mounting between flanges

Model:

Referencia Size Weight (Kg) Box / carton 2110 04 MOUNTING BETWEEN FLANGED PN16 1.5 1/1 2110 05 MOUNTING BETWEEN FLANGES PN16 2 1/1 2110 06 MOUNTING BETWEEN FLANGED PN16 3 1/1 2110 07 WAFER 1PC FULL BORE B.V 1 1/4″ BETWEEN FLANGES PN-16 5 1/1 2110 08 WAFER 1PC FULL BORE B.V 1 1/2″ BETWEEN...

Wafer type 1 pc full bore ball valve mounting between flanges

Model:

Referencia Size Weight (Kg) Box / carton 2105 06 MOUNTING BETWEEN FLANGES PN16 3 1/1 2105 07 MOUNTING BETWEEN FLANGES PN16 5 1/1 2105 08 MOUNTING BETWEEN FLANGED PN16 6.5 1/1 2105 09 MOUNTING BETWEEN FLANGED 2″ 8 1/1 2105 10 MOUNTING BETWEEN FLANGED PN16 16 1/1 2105 11 MOUNTING BETWEEN FLANGES 3″ 21 1/1...

Butterfly valves 2101

Model:

Specification Butterfly valves 2101 1. Butterfly valve wafer type. 2. Ductile iron EN-GJS-400 (GGG-40) split body allows installation between ANSI 150 and EN 1092 PN 10/16 pipe flanges. 3. PTFE body seat on EPDM backseat. 4. Butterfly disc of Stainless Steel 1.4408 (CF8M) polished. 5. Stem made of AISI 316. 6. Actuator mounting plate according...

Butterfly valves 2104

Model:

Specification Butterfly valves 2104 1. Butterfly valve wafer type. 2. Stainless Steel 1.4408 (CF8M) split body allows installation between ANSI 150 and EN 1092 PN 10/16 pipe flanges. 3. PTFE body seat on EPDM backseat. 4. Butterfly disc made of Stainless Steel 1.4408 (CF8M). 5. Stem made of Stainless Steel AISI 316. 6. Actuator mounting...

Butterfly valves 2108

Model:

Features Butterfly valves 2108 1. Butterfly valve Lug type. 2. Ductile Iron EN-GJS-400 (GGG-40) body allows installation between EN 1092 PN 10/16 flanges. 3. EPDM body seat. 4. Disc made of Stainless Steel 1.4408 (CF8M). 5. Actuator mounting plate according to ISO 5211. 6. Face to face according to EN 558-1 Series 20 (DIN 3202...

Butterfly valves 2109

Model:

Features Butterfly valves 2109 1. Butterfly valve wafer type. 2. EN-GJL-200 (GG-20) CI body allows installation between ANSI 150 and EN 1092 PN 10/16 flanges. 3. EPDM body seat. 4. Disc made of Stainless Steel 1.4408 (CF8M). 5. Actuator mounting plate according to ISO 5211. 6. Face to face according to UNE EN 558-1 Series...

Bellow globe valve 2231

Model:

Globe valve 2230

Model:

Features Globe valve 2230 1. Globe valve. 2. Made of Stainless Steel 1.4408 (CF8M). 3. Compact disc made of S. Steel 316. 4. Threaded ends according ISO 7-1 (EN 10226-1). 5. Stem Packing PTFE. 6. Max. Working pressure 16 bar. 7. Max. Working temperature 180 ºC. Read More: Steam Products ADCA

Globe valve 2233A

Model:

Features Globe valve 2233A 1. Globe valve 150 Class. 2. Design according to EN ISO 15761 (API 602). 2. Made by Forged Steel ASTM A105. 3. Stainless Steel Seat hardened with Stellite. 4. Stainless Steel Disc. 5. Trim # 8 (equivalent to XU). 6. Flanged ends according to ANSI B 16.5. 7. Bolted Bonnet. 8....

Globe valve 3228

Model:

Features Globe valve 3228 Suitable for industrial and hydraulic installations. Construction in bronze RG 5. Gas (BSP) threaded female ends according to ISO 228/1. Ideal for hot / cold water and different oils. Working temperature from -10ºC to 180ºC. Maximum working pressure 16 bar (PN 16). PTFE sealing. Read more: Globe valves

Gate valves 2232A

Model:

Features Gate valves 2232A 1. Gate valve 150 Class. 2. Design according to EN ISO 15761 (API 602). 3. Made by Forged Steel ASTM A105. 4. Stainless Steel Seat hardened with Stellite. 5. Stainless Steel Wedge Disc. 6. Trim # 8 (equivalent to XU). 7. Flanged ends according to ANSI B 16.5. 8. Bolted Bonnet....

Gate valves 2232N

Model:

Features Gate valves 2232N 1. Gate valve Class 800. 2. Design according to EN ISO 15761 (API 602). 3. Made by Forged Steel ASTM A105. 4. Hardened stainless steel seat with Stellite. 5. Wedge Disc made of Stainless Steel. 6. Trim # 8 (equivalent to XU). 7. Threaded ends according to ASME B1.20.1 NPT. 8....

Gate valves 2232S

Model:

Features Gate valves 2232S 1. Gate valve Class 800. 2. Design according to EN ISO 15761 (API 602). 3. Made by Forged Steel ASTM A105. 4. Hardened stainless steel seat with Stellite. 5. Wedge Disc made of Stainless Steel. 6. Trim # 8 (equivalent to XU). 7. Threaded ends according to ASME B1.20.1 NPT. 8....

Gate valves 2220

Model:

Features Gate valves 2220 1. Gate valve. 2. Made of Stainless Steel 1.4408 (CF8M). 3. Compact disc made by 1.4408 (CF8M). 4. Non-rising stem. 5. Threaded ends acc. to ISO 7-1 (EN 10226-1). 6. Stem Packing PTFE. 7. Max. Working pressure 16 bar. 8. Working temperature -30ºC / 180 ºC Read more: Gate valves

Gate valves 2102

Model:

Features Gate valves 2102 1. Gate valve with elastic closing. 2. Made by Ductile Iron EN-GJS-500 (GGG-50). 3. Wedge coated EPDM. 4. Non-rising stem. 5. Clockwise for close valve. 6. Design according to DIN 3352. 7. Face to Face according DIN 3202 F4. 8. Flanges end according DIN 2501 PN 16. 9. Suitable medium: Water....

Check valve class 800 Piston type – 2234N

Model:

Features Check valve class 800 Piston type – 2234N 1. Check valve Class 800 Piston Type. 2. Design according to EN ISO 15761 (API 602). 3. Made of Forged Steel ASTM A105. 4. Seat in the body hardened with Stellite. 5. Piston made of tempered Stainless Steel. 6. Trim # 8 (equivalent to XU). 7....

Disk check valve with flanges DIN PN 16 – 2450

Model:

Features Disk check valve with flanges DIN PN 16 – 2450 1. Check Disk valve. 2. Made by Cast Iron EN-GJL-250 (GG-25). 3. Flanges ends according DIN 2501 PN-16. 4. NBR seal. 5. Silent closing. 6. Stem and Guide made by brass + Niquel until DN-100, DN-125 until DN-250 cast iron GG-25 + Niquel plated....

Foot check valve with DIN PN 16 flange end 2448

Model:

Features Foot check valve with DIN PN 16 flange end 2448 1. Foot Check valve. 2. Made by Stainless Steel 1.4408 (CF8M). 3. Flange end according DIN 2501 PN-16. 4. FKM seal (Viton). 5. PTFE gasket. 6. Manual system to empty. 7. Max. Working pressure 16 bar. 8. Working temperature -30 ºC + 180 ºC....

Swing check valve PN16 – 2430

Model:

Features Swing check valve PN16 – 2430 1. Swing Check Valve. 2. Made of Stainless Steel 1.4408 (CF8M). 3. Threaded ends according to ISO 7-1 (EN 10226-1). 4. Max. working pressure 16 bar. 5. Max. working temperature 180 ºC. 6. Installed in horizontal or vertical flow Read more: Check valves

Disk check valve PN63 – 2413

Model:

Features Disk check valve PN63 – 2413 1. Single disk check valve. 2. Threaded ends acc. to ISO 7-1 (EN 10226-1). 3. Made of Stainlees Steel 1.4408 (CF8M). 4. Disk made of Stainlees Steel 1.4408 (CF8M). 5. Spring made of Stainless Steel AISI 316. 6. Small dimensions. 7. PTFE seat. 8. Max. working pressure 63...

Wafer type Disk check valve 2415

Model:

Features Wafer type Disk check valve 2415 1. Wafer check valve, single disk. 2. Made of stainless steel 1.4408 (CF8M). 3. Disk made of stainless steel 1.4408 (CF8M). 4. Spring made of AISI 316. 5. Small dimensions. 6. Assembly between flanges EN 1092 PN10/16/25/40 and ANSI 150/300. 7. Installed with vertical, horizontal or inclined flow....

Wafer type Disk check valve din PN 16

Model:

Features Wafer type Disk check valve din PN 16 1. Wafer check valve (single disk). 2. Made of Stainless Steel 1.4408 (CF8M). 3. External o’ring made of FKM (Viton). 4. Disk o’ring (seat) made of FKM (Viton). 5. Assembly between flanges EN 1092 PN10/16 & ANSI150. 6. Installed with vertical (or horizontal flow. 7. Max....

Wafer type Double disk check valve PN 25

Model:

Features Wafer type Double disk check valve PN 25 1. Wafer check valve (double disk). 2. Made of Stainless steel 1.4408 (CF8M). 3. Disk made of Stainless steel 1.4408 (CF8M). 4. Axle and spring made of AISI 316. 5. Seat of FKM (Viton) vulcanised in groove. 6. Assembly between flanges EN 1092 PN25 and ANSI...

Van giảm áp nước Genebre 3344 - Direct acting piston flanged ends pressure reducing valve

Direct acting piston flanged ends pressure reducing valve 3344

Model:

Features Direct acting piston flanged ends pressure reducing valve 3344 Max. working pressure 30 bar (PN30) / 340 psi. Bronce alloy body acc/ UNE-EN 1982. Inner metal components in brass CW614N acc/UNE-EN 12164 and CW617N acc/ UNE-EN 12165. O-rings in NBR 70sh / EPDM. Stainless steel shutter AISI 303. Plastic components in acetalic resin. Adjustable...

Van giảm áp nước Genebre 3324-Membrane pressure reducer valve with filter

Membrane pressure reducer valve with filter 3324

Model:

Technical Features Membrane pressure reducer valve with filter 3324 Maximum working pressure (PN) 16 bar. Adjustable range since 0,5 to 7 bar with graduated handweel pressure indicator. Outlet setting pressure 3 bar. Maximum working temperature 80ºC. Suitable for water. Threaded ends under ISO 228/1. Pressure gauge connection G¼” (ISO 228/1). Filter of 800 microns. Membrane...

Van giảm áp nước Genebre 2272 - Stainless steel pressure reducing valve

Stainless steel pressure reducing valve 2272

Model:

Features Stainless steel pressure reducing valve 2272 Pressure reducing valve – Direct Action for liquid and gas applications. Not suitable for steam. Threaded ends acc. to ISO 7-1 (EN 10226-1). Body in Stainless Steel 1.4408 (CF8M). Piston & Diaphragm design improves the ability of sustaining pressure regardless of the instability of the inlet pressure. Seat...

Van giảm áp nước Genebre 3320 - "Rinoxdue" piston pressure reducer valve

Rinoxdue piston pressure reducer valve 3320

Model:

Features Rinoxdue piston pressure reducer valve 3320 Maximum working pressure 25 bar (PN-25). Brass body CW617N acc/ UNE-EN 12165. Inner metal components in brass CW614N acc/UNE-EN 12164. O-rings in nitrile elastomer NBR. Stainless steel shutter AISI 303. External plastic components in nylon 6 with 30% glass fiber. Adjustable range from 0,5 to 4 bar (for...

Van giảm áp nước Genebre 3318 - Redux-GE piston pressure reducer valve

Redux-GE piston pressure reducer valve 3318

Model:

Features Redux-GE piston pressure reducer valve 3318 Maximum working pressure 25 bar (PN-25). Body in brass, nickel plated finished: CW617N acc/ EN12165 for 1/2″ to 2″ and CB753S acc/ EN1982 for 2 1/2″, 3″ and 4″. Other components: See table Adjustable range: 1 to 5,5 bar (1/2″ to 2″) and 1,5 to 7 bar (2...

Van giảm áp nước Genebre 3342 - Membrane pressure reducer valve

Membrane pressure reducer valve 3342

Model:

Features Membrane pressure reducer valve 3342 Maximum working pressure PN 25 bar. Adjustable range since 1 to 6 bar with graduated handweel pressure indicator. Outlet setting pressure 3 bar. Maximum working temperature 80ºC. Membrane pressure reducer valve. Regulator handwheel with pressure indicator. Stainless steel AISI 304 filter of 800 microns. Suitable for water, Glycol solutions...

2 ways indirect acting solenoid valve N.C 4630

Model:

Features 2 ways indirect acting solenoid valve N.C 4630 1. Indirect acting solenoid valve 2/2 ways. 2. Normally closed N.C. 3. DN 1/4″ direct acting. 4. A minimum operational pressure of 0,5 bar is required (0 bar for DN 1/4″). 5. Maximum allowable pressure: – G 1/4″ (PS) 40 bar – G 1/2″ (PS) 25...

2 ways indirect acting solenoid valve N.C 4020

Model:

Features 2 ways indirect acting solenoid valve N.C 4020 1. Indirect acting solenoid valve 2/2 ways. 2. Normally closed N.C. 3. A minimum operational pressure of 0,2 bar is required. 4. Maximum allowable pressure: – G 3/8″, G 1/2″ (PS) 25 bar – G 3/4″, G 1″ (PS) 23 bar – G 1 1/4″, G...

2 ways indirect acting solenoid valve N.C 4425

Model:

Features 2 ways indirect acting solenoid valve N.C 4425 Indirect acting solenoid valve 2/2 ways. Normally closed N.C. For general applications on automation field and heating systems etc. Adapted for the interception of fluids compatible with the construction materials. Specification 2 ways indirect acting solenoid valve N.C 4425 Size: 1/2″, 3/4″, 1″ A minimum operational...

Flanged “Y” strainer 2461

Model:

Features Flanged “Y” strainer 2461 1. “ Y “Strainer. 2. Flanged ends according to EN 1092 PN16. 3. Face to Face according to EN 558 series 1 (DIN 3202 F1). 4. Made of Stainless Steel 1.4408 (CF8M). 5. Drain plug G1/2″ from size 11/4″. 6. Max. Working pressure 16 bar. 7. Working temperature -30 ºC...

Y strainer 2460

Model:

Features Y strainer 2460 1. “Y “Strainer. 2. Threaded ends according ISO 7-1 (EN 10226-1). 3. Made of Stainless Steel 1.4408 (CF8M). 4. Max. Working pressure 40 bar. 5. Working temperature -30 ºC + 240 ºC. Read More: Filters – Industrial

Flanged “Y” strainer 2458

Model:

Features Flanged “Y” strainer 2458 1. “Y” strainer. 2. Flanged ends according to EN 1092 PN 16. 3. Face to Face according to EN 558 series 1 (DIN 3202 F1). 4. Made of Cast Iron EN-GJL-250 (GG-25). 5. External and internal coating of epoxy paint. 6. Screen made of Stainless Steel AISI 304. 7. Body...

WHY CHOOSE ECOZEN?

Phụ kiện nhà tắm

Giải pháp IoT

VALVE ADCA

VALVE ZETKAMA

VALVE GENEBRE

PARTNER

CUSTOMER

WHY CHOOSE ECOZEN?

Phụ kiện nhà tắm

Giải pháp IoT

VALVE ADCA

VALVE ZETKAMA

VALVE GENEBRE

PARTNER

CUSTOMER

Login

Register