Showing 41–70 of 70 results

Finetek

Xem thêm
Model:

Features Power Source:  DC 5V RF Interface:  3.5mm SMA  Female connector (ANT) RF Band:  ISM Band 2.4G Interface:  USB

Model:

Features Power Source: DC 9~30V Signal Input Interface: 1. RS-485*4 2. 4-20mA*4 3. 1 Wire* 4 4. I/O* 4 RF Interface: 3.5mm SMA  Female connector (ANT) RF Band: 2.4G ISM Band or Quad band: GSM

Model:

Description The MMS series materials management system includes the MMS-TL and MMS-TLA software systems designed to run on PC’s. The MMS-TL is a materials management system for use in monitoring tank level inventories of liquid or bulk solid materials using a wide variety of Aplus Finetek level transmitter technologies. The MMS-TLA is a materials management...

Model:

Description SQ series is a pressure switch product line using an internal diaphragm that is exposed to process pressure via the pressure switch threaded process connection. Opposing the diaphragm is a compression spring. When the process pressure is greater than the force of the compression spring the switch contact will open or close depending on...

Model:

  • Bộ vi xử lý điều khiển chu kỳ đo và chẩn đoán
  • Phạm vi đo tới 30m (98ft)
  • Mặt bích điều chỉnh góc ≤45⁰
  • Tích hợp chuẩn MODBUS, ngõ ra 4-20mA và xung AC/DC
  • 3 ngõ ra relay
  • Hỗ trợ RCU và phần mềm PC
  • Nhiều loại quả cảm biến
  • Không cần cắt cáp

Model:

Description The EB series RF admittance level transmitter measures the changing capacitance between the sensing probe and the reference ground to determine the level of the material in the vessel. When the sensing probe is in air only (no material around the sensing probe; vessel is empty), the amount of capacitance is measured. As the...

Model:

  • Nguồn cấp: 24Vdc hoặc 115/230Vac.

  • Vật liệu đầu dò: SUS304 hoặc SUS316.

  • Vật liệu cách điện: PTFE (cho nhiệt độ thường) hoặc PEEK/Ceramic (cho nhiệt độ cao).

  • Kết nối: Ren (3/4", 1" NPT/PT) hoặc Mặt bích (JIS, ANSI, DIN).

Model:

  • Công nghệ Vi sóng (Microwave)

  • Giám sát thời gian thực

  • Loại trừ nhiễu

  • Thiết kế tối ưu

  • Không cần bảo trì

  • An toàn phòng nổ (ATEX)

Model:

  • Vật liệu vỏ: Thép không gỉ 1.4307 (Inox 304L), chống ăn mòn.

  • Bề mặt cảm biến: Teflon (Tiêu chuẩn) hoặc Gốm (Tùy chọn chịu nhiệt/mài mòn).

  • Kết nối cơ khí: Ren G 1 ½ inch.

  • Khoảng cách đo: Tối đa 25 mét.

  • Nhiệt độ quy trình: -20°C đến +85°C.

  • Áp suất quy trình: Tiêu chuẩn 6 bar (Tùy chọn phiên bản chịu áp cao 30-60 bar).

  • Nguồn cấp: 24 VDC (18-30 VDC).

Model:

  • Công nghệ Triboelectric
  • Cảnh báo kép (2 Relays)
  • Độ bền công nghiệp:
  • Tối ưu lắp đặt
  • Hiệu chuẩn thông minh
  • An toàn phòng nổ

6 lý do nên chọn Ecozen

Nhập khẩu Châu Âu, đầy đủ giấy tờ xuất xứ.

Ecozen tư vấn giải pháp cải thiện/mở rộng hệ thống và tối ưu năng lượng.

Hỗ trợ kỹ thuật toàn quốc 24/7. Hội thảo kỹ thuật miễn phí.

4 Văn phòng tại Hồ Chí Minh, Hà Nội, Đà Nẵng, Cần Thơ. Ecozen cung cấp sản phẩm dịch vụ phạm vi toàn quốc.

Đội ngũ kỹ thuật giỏi chuyên môn, giàu kinh nghiệm và tư vấn tận tâm.

Kho hàng có sẵn, đáp ứng tối đa nhu cầu khách hàng.

Giải pháp IoT

No slides available for this category.

Bài viết liên quan

Không có bài viết liên quan nào được tìm thấy.

Hỗ trợ kỹ thuật / tư vấn báo giá

0901 19 06 08

    Chat Zalo
    Gọi 0901 19 06 08
    //Chữa cháy 07/2026