Steam Products ADCA

Xem thêm

Model:

Hot Condensate Coolers Adca Model HCC The HCC is a cooling device that allows the mixing of hot condensate with a lower temperature condensate, avoiding hammering. Condensate discharge from higher pressure lines (drip points, for instance) is often connected to low-pressure condensate lines, with lower temperatures. This sudden pressure drop will convert the sensible heat...

Valve insulation jackets Onse

Model:

Compressed Air Ball Float Traps Model FA17G

Model:

Features Compressed Air Ball Float Traps Model FA17G Modulating discharge. Unaffected by sudden or wide load and pressure changes. Specification Compressed Air Ball Float Traps Model FA17G Size: 11/2” to 2” – DN 40 to 50 CONNECTIONS Female threaded ISO 7 Rp. Flanged EN1092-2 PN16 or ANSI Class 150 lb. INSTALLATION Standard horizontal installation –...

High Pressure Electronic Level Sensed Condensate Drain Model KAPTIV-CS-HP

Model:

Features High Pressure Electronic Level Sensed Condensate Drain Model KAPTIV-CS-HP – The KAPTIV-CS-HP is a compact electronically operated level sensed condensate drain which offers zero air-loss during the condensate discharge cycle for applications up to 50 bar. – The KAPTIV-CS-HP is cost effective and offers a rapidpay-back period due to a competitive pricing level, low...

Electronic timer controlled condensate drain Model 2506

Model:

Features Electronic timer controlled condensate drain Model 2506 – The FLUIDRAIN®COMBO removes condensate from compressed air systems using a direct acting solenoid valve in combination with an electronic timer. – The integrated ball valve and strainer protect the valve by filtering out large dirt and rust particles. – The FLUIDRAIN®COMBO saves installation time and is...

Fiilter drain Jorc Model MAGY 3904

Model:

Features Fiilter drain Jorc Model MAGY 3904 – The MAG-11 is the optimum choice in energy saving condensate drains. Unlike timed or electronic drains which require electricity to operate, the MAG-11 operates using a magnetic level sensor providing energy saving zero air loss operation without the need for a power source. – Perfectly suited for...

Bẫy phao nhiệt động Adca FS32 – FLOAT AND THERMOSTATIC STEAM TRAPS

FLOAT AND THERMOSTATIC STEAM TRAPS Model FS32

Model:

Bẫy phao nhiệt động Adca UFS32 – FLOAT & THERMOSTATIC STEAM TRAPS

FLOAT & THERMOSTATIC STEAM TRAPS Modle UFS32

Model:

Features FLOAT & THERMOSTATIC STEAM TRAPS Modle UFS32 Sealed, non-maintainable. Modulating discharge. Discharges condensate at steam temperature. Unaffected by sudden or wide load and pressure changes. Excellent air discharge (by thermostatic air vent) Specification FLOAT & THERMOSTATIC STEAM TRAPS Modle UFS32 SIZES: According to the pipeline connector. INSTALLATION: Always in a horizontal plane with the...

Free float steam trap Model NST33FX

Model:

Features Free float steam trap Model NST33FX Energy saving Easy to repair Large surface area Guaranteed trouble-free operation Easy to clean Specification Free float steam trap Model NST33FX Material: Carbon Steel Size: DN15 – DN25 Connection: flange Maximum temperature: 220℃ Maximum pressure: 16 Bar Weight: 7.5 -10 kgs Read more: Float steam traps

Compressed Air Ball Float Traps Model FA16SS

Model:

Features Compressed Air Ball Float Traps Model FA16SS Corrosion-resistant. Replaceable internal parts. Modulating discharge Unaffected by sudden or wide load and pressure changes Specification Compressed Air Ball Float Traps Model FA16SS SIZE: DN 1/2” and ¾”. CONNECTIONS Inlet ½” or ¾” vertical (top to bottom) Outlet ½” vertical. Female screwed ISO 7/1Rp(BS21) INSTALLATION Vertical installation....

Compressed Air Ball Float Traps Model FA32

Model:

Features Compressed Air Ball Float Traps Model FA32 Modulating discharge. Unaffected by sudden or wide load and pressure changes. Specification Compressed Air Ball Float Traps Model FA32 Size: DN 1” – DN 25. CONNECTIONS Female screwed ISO 7/1Rp(BS21) Flanged EN 1092-1 PN40 or ANSI. Special flanges upon request. INSTALLATION: Horizontal or vertical installation. PMO –...

Float and thermostatic steam traps Model FLT 50S-65S

Model:

Features Float and thermostatic steam traps Model FLT 50S-65S Modulating discharge. Discharges condensate at steam temperature. Unaffected by sudden or wide load and pressure changes. Excellent air discharge (by thermostatic air vent). Specification Float and thermostatic steam traps Model FLT 50S-65S Size FLT50 – DN 50 and DN 65 FLT65 – DN65 to DN100 CONNECTIONS:...

Bẫy nhiệt động Adca UDT46 – Universal_thermodynamic_steam_trap

Universal thermodynamic steam trap Model UDT46

Model:

Features Universal thermodynamic steam trap Model UDT46 Intermittent discharge. Standard insulation cover. Operates on superheated steam. Replaceable seat and disc. Unaffected by water hammer and vibrations. Specification Universal thermodynamic steam trap Model UDT46 SIZES: According to the selected pipeline connector. INSTALLATION: See IMI. PMO – Max. operating pressure 32 bar TMO – Max. operating temperature...

Xả khí đường hơi Adca TS22 – THERMOSTATIC STEAM TRAP

THERMOSTATIC STEAM TRAP Model TS22

Model:

Features THERMOSTATIC STEAM TRAP Model TS22 Modulating discharge. Discharges condensate close to steam temperature. Thermostats for different subcooling (5ºK to 30ºK). Excellent air discharge. Operates on moderate superheated steam. Specification THERMOSTATIC STEAM TRAP Model TS22 Size: DN 1/2″ , 3/4″; DN15 to DN25 CONNECTIONS Female screwed ISO 7/1 Rp (BS21) Flanged EN 1092-1 PN40 Flanged...

Xả khí đường hơi DT40S -Thermodynamic Steam Traps

Thermodynamic Steam Traps Model DT40S

Model:

Features Thermodynamic Steam Traps Model DT40S Intermittent discharge. Operates on superheated steam. The disc can be easily replaced in field without removing the trap from the line. Unaffected by water-hammer and vibrations. Integral seat. Specification Thermodynamic Steam Traps Model DT40S SIZES: DN3/8” to DN 1” CONNECTIONS: Female screwed ISO7/1 Rp (BS21) INSTALLATION Horizontal installation recommended....

Thermodynamic Steam Traps Model DT42S

Model:

Features Thermodynamic Steam Traps Model DT42S Intermittent discharge. Operates on superheated steam. The seat and disc can be easily replaced in field without removing the trap from the line. Unaffected by water hammer and vibrations Built-in easy-to-clean strainer. Specification Thermodynamic Steam Traps Model DT42S Size: DN ½” to DN 1” – DN15 to DN25 CONNECTIONS...

Thermostatic Steam Traps And Air Eliminators Model TH13A

Model:

Features Thermostatic Steam Traps And Air Eliminators Model TH13A Modulating discharge. Discharges condensate close to steam temperature. Thermostats for different sub cooling (5ºK to 30ºK). Excellent air discharge. Simple and compact design. Built-in strainer. Specification Thermostatic Steam Traps And Air Eliminators Model TH13A SIZES: DN ½” CONNECTIONS: Female screwed ISO 7/1 Rp (BS21) INSTALLATION: Vertical...

Thermodynamic Steam Traps Model DT46

Model:

Features Thermodynamic Steam Traps Model DT46 Intermittent discharge. Standard insulation cover Operates on superheated steam. The seat and disc can be easily replaced in field without removing the trap from the line. Unaffected by water hammer and vibrations Built-in easy-to-clean strainer. Specification Thermodynamic Steam Traps Model DT46 SIZES: DN ½” to DN 1” – DN15...

Bimetallic Steam Traps Model BM20

Model:

Features Bimetallic Steam Traps Model BM20 Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water hammer and vibrations. Built-in strainer. Specification Bimetallic Steam Traps Model BM20 SIZES: DN ½” to 1”; DN15 to DN25. CONNECTIONS Female screwed ISO 7/1 Rp (BS21) Flanged EN1092-1 PN40 or ANSI INSTALLATION...

Bẫy hơi lưỡng kim UBS20 ADCA – BIMETALLIC STEAM TRAP

BIMETALLIC STEAM TRAP Model UBS20

Model:

Features BIMETALLIC STEAM TRAP Model UBS20 Sealed, non-maintainable. Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water-hammer and vibrations. Specification BIMETALLIC STEAM TRAP Model UBS20 SIZES: According to the selected pipeline connector. INSTALLATION: In any position PMO – Max. operating pressure 17 bar TMO – Max. operating...

Bẫy hơi lưỡng kim BS32-Bimetallic steam trap DN15-20

Bimetallic steam trap Model BS32

Model:

Features Bimetallic steam trap Model BS32 Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water hammer and vibrations. Built-in strainer. Uniadca compatible Specification Bimetallic steam trap Model BS32 SIZES: DN ½” to 3/4”; DN15 to DN20. CONNECTIONS: Female screwed ISO 7/1 Rp (BS21) Flanged EN 1092-1 PN40...

Bẫy hơi lưỡng kim Adca BM-HC – Bimetallic steam trap DN 40-100

Bimetallic steam trap Model BM24HC

Model:

Bẫy hơi lưỡng kim Adca BM24- Bimetallic steam traps

Bimetallic steam trap Model BM24

Model:

Features Bimetallic steam trap Model BM24 Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water-hammer and vibrations. Built-in strainer. Specification Bimetallic steam trap Model BM24 SIZES: DN11/2” – DN2”; DN 40 – DN 50 CONNECTIONS: Female screwed BSP or NPT Flanged EN 1092-1 PN40 or ANSI SW...

Bẫy hơi lưỡng kim Adca BSR22 – -Uniadca sealed bimettalic adjustable trap

Uniadca sealed bimettalic adjustable trap Model: BSR22

Model:

Features Uniadca sealed bimettalic adjustable trap Model: BSR22 External adjustment device Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water-hammer and vibrations. Specification Uniadca sealed bimettalic adjustable trap Model: BSR22 SIZES : DN 1/2” , 3/4” and 1” DN 15, 20 and 25. According to the selected...

Thermostatic Steam Trap Model TH21SS, TH21/2SS

Model:

Features Thermostatic Steam Trap Model TH21SS, TH21/2SS Modulating discharge. Discharges condensate close to steam temperature. Thermostats for different sub cooling (5ºK to 30ºK). Excellent air discharge . Operates on moderate superheated steam. Built-in strainer. Specification Thermostatic Steam Trap Model TH21SS, TH21/2SS SIZES: DN ½” to DN 1” ; DN15 to DN25 CONNECTIONS: Female screwed ISO...

Bẫy hơi gầu đảo Adca IB35SS- Inverted bucket steam traps

Inverted bucket steam traps Model IB35SS

Model:

Features Inverted bucket steam traps Model IB35SS Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water-hammer and vibrations. Easy to maintain. Specification Inverted bucket steam traps Model IB35SS SIZES: IB35S – DN ½” – DN 1”; DN15 – DN25 IB35SS – DN ½” – DN ¾”; DN15 – DN20 CONNECTIONS: Female screwed ISO7/1 Rp...

Inverted Bucket Steam Traps Screw IB30S

Model:

Features Inverted Bucket Steam Traps Screw IB30S Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water-hammer and vibrations. Easy to maintain. Specification Inverted Bucket Steam Traps Screw IB30S SIZES: DN 1.½” – DN 2” ; DN40 – DN50 CONNECTIONS: Female screwed ISO7/1 Rp (BS21) Flanged EN 1092-1 PN25 or ANSI Special flanges on request....

Inverted Bucket Steam Trap Model IB30S-IB30SS

Model:

Features Inverted Bucket Steam Trap Model IB30S-IB30SS Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water-hammer and vibrations. Easy to maintain. Specification Inverted Bucket Steam Trap Model IB30S-IB30SS SIZES: DN ½” – DN 1” ; DN15 – DN25 CONNECTIONS: Female screwed ISO7/1 Rp (BS21) Flanged EN 1092-1 PN40 or ANSI INSTALLATION: Horizontal installation See...

Inverted Bucket Steam Traps Model IB12

Model:

Features Inverted Bucket Steam Traps Model IB12 Intermittent discharge. Discharges condensate at steam temperature. Unaffected by water hammer and vibrations. Easy to maintain. Specification Inverted Bucket Steam Traps Model IB12 SIZES: DN ½” – 3/4” CONNECTIONS: Female screwed ISO7/1 Rp (BS21) Threaded flanges on request INSTALLATION: Horizontal installation See IMI installation and maintenance instructions. PMO...

Bellow Seal Globe Valve Model VF40

Model:

Features Bellow Seal Globe Valve Model VF40 Double wall bellows specially designed for high durability. Position indicator Lubricator Maintenance free Secondary safety sealing Specification Bellow Seal Globe Valve Model VF40 RATING: PN40 SIZES: DN15 to DN 150 CONNECTIONS: Flanged EN1092-1 PN40 INSTALLATION: See IMI, installation and maintenance instructions. Read More: Steam Products ADCA

Bellow Seal Globe Valve Model 347

Model:

Specification Bellow Seal Globe Valve Model 347 Steel material Size: DN15 – DN250 Connection: flange Maximum pressure: 40 bar Operating Temperature: -10 ~ 400ºC Read More: Steam Products ADCA

Bellow Seal Globe Valve Model FIG.61

Model:

Specification Bellow Seal Globe Valve Model FIG.61 Material: Cast Iron Size: DN15 – DN200 Connection: flange Maximum pressure: PN16 Operating Temperature: -10 ~ 300ºC Read More: Steam Products ADCA

Bellow Seal Globe Valve Model FIG.51

Model:

Specification Bellow Seal Globe Valve Model FIG.51 Material: Cast Iron Size: DN15 – DN200 Connection: flange Maximum pressure: 16 bar Operating Temperature: -10 ~ 300ºC Read More: Steam Products ADCA

Bellow Seal Globe Valve Model 336

Model:

Specification Bellow Seal Globe Valve Model 336 Steel material Size: DN15 – DN250 Connection: flange Maximum pressure: 63 bar Operating Temperature: -10 ~ 400ºC Read More: Steam Products ADCA

Bellow Seal Globe Valve Model 53

Model:

Specification Bellow Seal Globe Valve Model 53 Material: gray cast iron Size: DN15 – DN150 Connection: Flange Maximum pressure: PN25 Operating Temperature: -10 ~ 350ºC Read More: Steam Products ADCA

Bellow Seal Globe Valve Model 63

Model:

Specification Bellow Seal Globe Valve Model 63 Material: gray cast iron Size: DN15 – DN150 Connection: Flange Maximum pressure: PN25 Operating Temperature: -10 ~ 350ºC Read More: Steam Products ADCA

Bellow Seal Globe Valve Model 346

Model:

Specification Bellow Seal Globe Valve Model 346 Steel material Size: DN15 – DN250 Connection: Flange Maximum pressure: 40 bar Operating Temperature: -10 ~ 400ºC Read More: Steam Products ADCA

Bellow seal top valve Model VF20

Model:

Features Bellow seal top valve Model VF20 Double wall bellows specially designed for high durability. Position indicator Lubricator Maintenance free Secondary safety sealing Specification Bellow seal top valve Model VF20 RATING: PN16 SIZES: DN15 to DN 250 CONNECTIONS: Flanged EN1092-2 PN16 INSTALLATION: See IMI, installation and maintenance instructions. Read More: Steam Products ADCA

Bronze Globe Valve Model GV32B

Model:

Features Bronze Globe Valve Model GV32B Rising stem PTFE renewable disk High quality PTFE packing Specification Bronze Globe Valve Model GV32B SIZES :DN1/2” – 2” CONNECTIONS: Female screwed ISO7/1Rp(BS21) LIMITING CONDITIONS : Body design conditions: PN32 198ºC at 14 bar 100ºC at 32 bar Read More: Steam Products ADCA

Pressure Reducing Valve Pilot Model PRV47/2

Model:

Features Pressure Reducing Valve Pilot Model PRV47/2 Robust complete carbon steel construction. Suitable for dead end conditions. Guided piston and valve stem. Hardened plug. Specification Pressure Reducing Valve Pilot Model PRV47/2 Size: DN65 – DN100 Connection: Flange EN1092-1 Working pressure: PN16/ PN40 Maximum operating temperature: 250ºC Solid carbon steel construction Suitable for dead end conditions....