Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0903 608 602
Read More: Steam Products ADCA
Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....
Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...
Features Automatic Blowdown Valve Model VPA26S High-quality hardened valve seat and plug. Manual or automatic intermittent timed control. Lockable in open position if supplied with manual operation lever. Practical foot operated lever. Maintenance free stem sealing. Tool-free quick exchangeable clamped-in seats, allowing fast and easy in-site maintenance procedures. Specification Automatic Blowdown Valve Model VPA26S Manual...
Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...
Specification Circular Transparent Lenses Model 006 — Boron silicate glass of high chemical stability. — Of great purity and homogeneity. — Low thermal expansion coefficient. — Thermally prestressed which guarantees high mechanical resistance. — High resistance to sharp changes of temperature, pressure and chemical aggression, guaranteeing a long life. — Joint surfaces are perfectly flat....
Feature Zetkama Bellow valve 234 High thightness (leakproofness class – A acc. EN -12266 – 1) Compact settlement Environment-friendly Tests acc. EN – 12266 – 1 Flanges drilled according to EN 1092-2 for body material A, C Flanges drilled according to EN 1092-1 for body material F Face-to-face dimension according to EN 558-1 series 1...
Features Pressure Reducing Valve Model P20P Compact design. Machined from barstock materials No rising handwheel Ultrasonically cleaned and degreased Specification Pressure Reducing Valve Model P20P Size: 1/4″ Connection Female screwed ISO7/1Rp(BS 21) or NPT. Special connections on request Working pressure: PN320 Maximum temperature: 80ºC INSTALLATION: In any position Read More: Steam Products ADCA
Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...
Specification Safety Valve Muffler 005 ― Small, light design. The circular shape absorbs vibrations that could cause damage over time. ― Compact, robust construction permitting liquid expansion and rises in temperature in the silencer, practically without restrictions and without producing stress in the structure. ― A diffuser consisting of a suitable combination of holes and...
Specification Boiler Level Controller 076-SC — Materials carefully selected for their resistance to wear and tear, temperature and corrosion. — Simplicity of construction ensuring minimum maintenance. — The area of connectors, terminals, magnetic switches, etc., is attached to a totally tightness base in the area in contact with the fluid. A cover of isolating temperature...
Features Pneumatic Control Valves Model PWV40I Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Stainless steel construction and soft sealing as standard. Specification Pneumatic Control Valves Model PWV40I Read More: Pneumatic control valves
Features Blowdown Control Valves VPC-32 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves VPC-32 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS: Flanged EN 1092-1. ANSI Class 150 and 300 lbs....
Features TDS controller Model BCS-211 Compatible with both SPS-21 and SPS-33 series conductivity probes. Relay (on/off) output and 4-20 mA transmitter output. Standard 35 mm rail fixation according to DIN EN 50022 or directly screwed to chassis plate. Allows quick performance tests by pressing and holding the “TEST K” button. Read more: Blowdown Water system...
Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...
Features Blowdown Control Valves Model VPC-25 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves Model VPC-25 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS: Flanged EN 1092-1. ANSI Class 150 and 300...
Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...
Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...
Features Stainless Steel Dir.Acting Pressure Reducing Valve Model PRV252SS Compact design. Bellows specially designed for high durability. Built-in strainer. Specification Stainless Steel Dir.Acting Pressure Reducing Valve Model PRV252SS Size: ½”, ¾”, 1” – DN15, DN20, DN25 Connection Female screwed ISO7/1Rp (BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum temperature: 210ºC...
Specification Blowdown valve for Boiler VYC Model 460 Size: DN25 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 250ºC Read More: Steam Boiler Blowdown Valves
Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...