Xem thêm

Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Model:

Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...

Pneumatic Angle Type Interception Valve Model PAV21

Model:

Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...

Self Operated Temperature Regulator Model TR40-TR40SS

Model:

Features Self Operated Temperature Regulator Model TR40-TR40SS Single seated, two way, direct action valve. Leakage less than 0,05% of full Kv Use: Saturated and superheated steam/ Hot and superheated water Specification Self Operated Temperature Regulator Model TR40-TR40SS SIZES: DN15 to DN 25. CONNECTIONS: Flanged EN 1092-1 PN16 – PN40 CONTROL MODE: Proportional THERMOSTATS T.205 –...

Pneumatic Control 3 ways ball valve Genebre Model 5040

Model:

Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...

Pneumatic Control Ball Valve Genebre Model 5025

Model:

Pneumatic Control Ball Valve Genebre Model 5025 Material: Stainless Steel Size: DN15 – DN50 Connection: Threaded Maximum pressure: 63bar Operating Temperature: -25 ~ 180ºC Read More: Pneumatic control valves

Pneumatic Control Valves Model PWV40I

Model:

Features Pneumatic Control Valves Model PWV40I Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Stainless steel construction and soft sealing as standard. Specification Pneumatic Control Valves Model PWV40I Read More: Pneumatic control valves

Van điều khiển khí nén dạng màng, áp suất cao ADCA

Pneumatic Control Valves Model PA45

Model:

Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...

Pneumatic Control Valves Model PV16G

Model:

Features Pneumatic Control Valves Model PV16G Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic Control Valves Model PV16G Read More: Pneumatic control valves

ON-OFF Diaphragm Pneumatic Control Valve Model PV25G

Model:

Features ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Read More: Pneumatic control valves

Pneumatic Control Valves Model PPV25G

Model:

Features Pneumatic Control Valves Model PPV25G Single seated, two ways, direct or reverse action valve. Soft sealing as standard. Actuator housing 360º rotation (clockwise). Specification Pneumatic Control Valves Model PPV25G Size: DN15 – DN50 Connection: Flanged EN1092-2 PN16 Maximum pressure: PN16 Maximum temperature: 300ºC Read More: Pneumatic Shut-off Valves (On/Off)

Pneumatic valve control output Model PV25G

Model:

Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...

Electric Control 3 ways reduced bore ball valve Genebre Model 5641

Model:

Features Electric Control 3 ways reduced bore ball valve Genebre Model 5641 Corrosion Resistant. Fixation ISO 5211. Protection IP-67. Manual Override. Optic indicator of position 2 additional contacts of final of career. Automatic temperature control: An internal 3,5 W thermostatically controlled heater maintains the internal temperature between 20º and 30º C eliminating the damage by...

Electric Control Ball Valve Genebre Model 5635

Model:

Specification Electric Control Ball Valve Genebre Model 5635 Size: 1/4″ – 4″ Stainless steel full port ball valve, 3 pieces. Thread ends according to ISO 7-1 (EN 10226-1). Made of stainless steel 1.4408 (CF8M). Ball seats PTFE + 15 % G.F. (please ask for other materials) O’ring in the stem FKM (Viton). Stem gasket PTFE...

Electric control valve Model EV25S – EV25G

Model:

Features Electric control valve Model EV25S – EV25G Mixing or diverting purpose control valve. Standard packing or bellows sealed stem sealing. Specification Electric control valve Model EV25S – EV25G Read More: Electric Control Valves

Blowdown valve for Boiler VYC Model 460

Model:

Specification Blowdown valve for Boiler VYC Model 460 Size: DN25 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 250ºC Read More: Steam Boiler Blowdown Valves

Automatic Blowdown Valve Model VPA26S

Model:

Features Automatic Blowdown Valve Model VPA26S High-quality hardened valve seat and plug. Manual or automatic intermittent timed control. Lockable in open position if supplied with manual operation lever. Practical foot operated lever. Maintenance free stem sealing. Tool-free quick exchangeable clamped-in seats, allowing fast and easy in-site maintenance procedures. Specification Automatic Blowdown Valve Model VPA26S Manual...

Blowdown valve for Boiler Model VPA26

Model:

Features Blowdown valve for Boiler Model VPA26 High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Blowdown valve for Boiler Model VPA26 Read More: Steam Boiler Blowdown Valves

Manual Blowdown Valve Model VPA26S

Model:

Features Manual Blowdown Valve Model VPA26S High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Manual Blowdown Valve Model VPA26S Manual or automatic control. Size: DN20 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 400ºC Read More: Steam...

Automatic Pump And Steam Trap Adcamat APST

Model:

Features Automatic Pump And Steam Trap Adcamat APST No electric requirements. No NPSH issues. Operation under vacuum conditions. No motive or flash steam is lost. Low filling head for minimal installation space requirements Specification Automatic Pump And Steam Trap Adcamat APST SIZES 2” x 2” and 3” x 2”. DN 50 x 50 and DN...

Packaged Adcamat Automatic Pump

Model:

Packaged Adcamat Automatic Pump POPK-SD (Duplex) & POPK-ST (Triplex)

Model:

PRESSURE OPERATED PUMP ADCAMAT POP-S

Model:

Water Saving Jet-Spray Gun Adcamix SG20

Model:

SpecificationWater Saving Jet-Spray Gun Adcamix SG20 Size: DN15 Maximum temperature: 95ºC Use: cold water and hot water Read More: Special Equipments

Steam Water Mixers Adcamix Model MX20

Model:

Features Steam Water Mixers Adcamix Model MX20 Safety device against accidentally steam ejection. Non return valves included. Complete stainless steel construction. Quiet operation. Specification Steam Water Mixers Adcamix Model MX20 Dimensions: 3/4″ x 3/4″ Connection: Thread Maximum pressure: 10 bar Maximum temperature: 95ºC Steam – Water mixer: to create hygienic hot water. Read More: Special...

Flash Vessels RV

Model:

Features Flash Vessels RV Several possibilities of installation and special sizes and types (available on request). Specification Flash Vessels RV SIZES: RV06, RV08, RV12, RV16 and RV18 CONNECTIONS Flanged EN 1092-1 PN 16 Special flanges upon request INSTALLATION Vertical installation. Horizontal condensate inlet and outlet or alternative horizontal inlet and vertical condensate outlet. Maximum pressure:...

Adcatherm Boiler Feed Tanks BFT

Model:

Features Adcatherm Boiler Feed Tanks BFT Sandblasted and metalized internally and externally (externally painted). Prevents energy wasting Can be installed on new or existing systems Specification Adcatherm Boiler Feed Tanks BFT Capacity: 500 – 6000 liters Maximum pressure: 6bar Operating Temperature: -10 ~ 120ºC CONNECTIONS Flanges EN1092-1 PN16 or ANSI. Sockets BSP or NPT Different...

Steam Header – Steam Distribution Manifold Mas

Model:

Features Steam Header – Steam Distribution Manifold Mas Several installation possibilities Reduced field assembly costs by means of prefabrication. Specification Steam Header – Steam Distribution Manifold Mas SIZES: DN100 to DN300 CONNECTIONS Flanged EN 1092-1 PN16 and PN40 ANSI Class 150 lbs and Class 300 lbs Female screwed BSP or NPT on request. INSTALLATION: Always...

Steam Injectors SI

Model:

Steam Injectors Model SI 115

Model:

Features Steam Injectors Model SI 115 Quiet operation. Corrosion-resistant. No moving parts. Specification Steam Injectors Model SI 115 SIZES: 1/2” CONNECTIONS: Female screwed ISO 7/1 Rp (BS21) INSTALLATION: Horizontal installation. LIMITING CONDITIONS: Body design conditions : PN 25 Max. operating pressure : 17 bar Max. recommended water temp: 95 ºC MATERIALS: Austenitic stainless steel throughout...

Lifting Pots LIPO

Model:

Specification Lifting Pots LIPO OPTIONS: Stainless steel construction. USE: Condensate lines where condensate has to be lifted. SIZES: DN 15 to DN100 CONNECTIONS: Flanged EN1092-1 or ANSI. Different connections on request. CONSTRUCTION: Carbon steel or stainless steel under request. INSTALLATION: Vertical installation (inlet/outlet angle connections) The differential pressure must be enough to overcome the pressure...

FRECO – Flash steam and condensate heat recovery

Model:

Features Different kinds of materials and designs available, according to the application. Specification OPTIONS: Atmospherically vented units, to avoid extra back pressure in the condensate return system. USE: Steam, water, hot condensate and other fluids compatible with the construction. ORDER REQUIREMENTS: Condensate flow rate and temperature Make-up water flow rate and temperature Operating pressures Steam...

PAT Series Plate Heat Exchangers

Model:

Features PAT Series Plate Heat Exchangers Corrosion-resistant stainless steel plates Highly efficient heat transfer (K-values much higher comparing with shell and tube design) Less area required for installation Low liquid content Additional capacity available by fitting extra transfer plates Specification PAT Series Plate Heat Exchangers OPTIONS : Special designs and materials (titanium, etc). Brazed construction...

Pressure Reducing Valve Model P-130

Model:

Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....

Thermostatic clean steam trap Model TSS6

Model:

Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...

Pressure reducing valve Model RP45I ANSI150/300

Model:

Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...

Pneumatic control valves Model PV926H

Model:

Features Pneumatic control valves Model PV926H Completely made from solid bar stock material. Single seated, two way, direct or reverse action valve. Valve bonnet permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal or soft sealing. Self draining design. Specification Pneumatic control valves Model PV926H Internal wetted parts: ≤...

Sanitary pressure reducing valve P160

Model:

Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...

High purity ball valves M3HP True bore

Model:

Features High purity ball valves M3HP True bore True bore floating ball design. Completely made from solid bar stock material. Can be serviced without removal from pipeline. Bidirectional. Anti blow out proof stem. Tube weld with loose body flanges. (360º rotation after installation). ISO 5211 mounting (only sizes ≥1”). Specification High purity ball valves M3HP...

Culinary steam filter ISC16

Model:

Features Culinary steam filter ISC16 Several retention rates available. Good durability against aggressive gases. Porosity level is more than 50% ensuring high particle and dirt load capacity as well as good flow rate at a low differential pressure. Regeneration by ultrasonic bath. Specification Culinary steam filter ISC16 Internal parts: ≤ 0,76 mícron Ra – SF3....

Sample coolers SC32P – SC32PP

Model:

Features Sample coolers SC32P – SC32PP Corrosion-resistant body and internals. Self draining sample (inlet top, outlet bottom). Specification Sample coolers SC32P – SC32PP Internal wetted parts: ≤ 0,51 micron Ra – SF1. External: ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00-Technical information. Ultrasonic cleaning. OPTIONS: Different connection sizes and materials USE: ...