Valve insulation jackets Onse
Thông tin cơ bản
Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0901 19 06 08
Sản phẩm tương tự
Related products
Model:
Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...
Model:
Features TDS controller Model BCS-211 Compatible with both SPS-21 and SPS-33 series conductivity probes. Relay (on/off) output and 4-20 mA transmitter output. Standard 35 mm rail fixation according to DIN EN 50022 or directly screwed to chassis plate. Allows quick performance tests by pressing and holding the “TEST K” button. Read more: Blowdown Water system...
Model:
Features Manual Blowdown Valve Model VPA26S High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Manual Blowdown Valve Model VPA26S Manual or automatic control. Size: DN20 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 400ºC Read More: Steam...
Model:
Features Diaphragm Sensing Pressure Sustaining Valve PS15SS Compact design. Machined from barstock materials. Specification Diaphragm Sensing Pressure Sustaining Valve PS15SS Size: DN8 – DN15 Connection Female screwed ISO7/1Rp(BS 21) or NPT. Flanged EN 1092-1 PN16/PN40 Special flanges upon request Working pressure: PN63 Maximum temperature: 80ºC Installation: Horizontal ORDER REQUIREMENTS: Type of fluid Read More: Steam...
Model:
Features Clean Steam Separator Model S-10H 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Separator Model S-10H SIZES: 1/2” to 3”. PIPE CONNECTIONS: Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to ISO 14644-1....
Model:
Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...
Model:
Features Blowdown Control Valves VPC-32 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves VPC-32 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS: Flanged EN 1092-1. ANSI Class 150 and 300 lbs....
Model:
Pneumatic Control Ball Valve Genebre Model 5025 Material: Stainless Steel Size: DN15 – DN50 Connection: Threaded Maximum pressure: 63bar Operating Temperature: -25 ~ 180ºC Read More: Pneumatic control valves
Model:
Features Globe valve 2230 1. Globe valve. 2. Made of Stainless Steel 1.4408 (CF8M). 3. Compact disc made of S. Steel 316. 4. Threaded ends according ISO 7-1 (EN 10226-1). 5. Stem Packing PTFE. 6. Max. Working pressure 16 bar. 7. Max. Working temperature 180 ºC. Read More: Steam Products ADCA
Model:
Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...
Model:
Features Self Operated Temperature Regulator Model TR40-TR40SS Single seated, two way, direct action valve. Leakage less than 0,05% of full Kv Use: Saturated and superheated steam/ Hot and superheated water Specification Self Operated Temperature Regulator Model TR40-TR40SS SIZES: DN15 to DN 25. CONNECTIONS: Flanged EN 1092-1 PN16 – PN40 CONTROL MODE: Proportional THERMOSTATS T.205 –...
Model:
Specification Electric Level Controller For Boller Model 176 — The electrode design is technically perfect, being fully tightness in steam, with several sealing points. — Simplicity of construction, eliminating the need for moving mechanical parts, which leads to minimum maintenance. — Materials carefully selected for their resistance to wear, temperature and pressure conditions. — Due...
Model:
Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...
Model:
Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...
Model:
Specification Safety Valve Model 685 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance. Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Sealing surfaces balanced and making them extremely tightness, even exceeding API-527 requeriments. Great discharge capacity. For liquids typically used...
Model:
Specification Safety Valve Model 496AP/496ES 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance. Materials carefully selected for their resistance to corrosion. With the exception of washers and couplings, the valves are free of non-ferric materials. Internal body designed to offer favourable flow profile. Sealing surfaces treated and balanced,...
Model:
Specification Blowdown valve for Boiler VYC Model 460 Size: DN25 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 250ºC Read More: Steam Boiler Blowdown Valves
Model:
Features ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Read More: Pneumatic control valves
