Specification Bellow Seal Globe Valve Model 53
- Material: gray cast iron
- Size: DN15 – DN150
- Connection: Flange
- Maximum pressure: PN25
- Operating Temperature: -10 ~ 350ºC
Read More: Steam Products ADCA
Bellow Seal Globe Valve Model 53
Thông tin cơ bản
Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0901 19 06 08
Sản phẩm tương tự
Related products
Model:
Features Pneumatic Control Valves Model PV16G Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic Control Valves Model PV16G Read More: Pneumatic control valves
Model:
Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...
Model:
Features Self Operated Temperature Regulator Model TR40-TR40SS Single seated, two way, direct action valve. Leakage less than 0,05% of full Kv Use: Saturated and superheated steam/ Hot and superheated water Specification Self Operated Temperature Regulator Model TR40-TR40SS SIZES: DN15 to DN 25. CONNECTIONS: Flanged EN 1092-1 PN16 – PN40 CONTROL MODE: Proportional THERMOSTATS T.205 –...
Model:
Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...
Model:
Features Pressure Reducing Valve Model P20P Compact design. Machined from barstock materials No rising handwheel Ultrasonically cleaned and degreased Specification Pressure Reducing Valve Model P20P Size: 1/4″ Connection Female screwed ISO7/1Rp(BS 21) or NPT. Special connections on request Working pressure: PN320 Maximum temperature: 80ºC INSTALLATION: In any position Read More: Steam Products ADCA
Model:
Features Globe valve 2230 1. Globe valve. 2. Made of Stainless Steel 1.4408 (CF8M). 3. Compact disc made of S. Steel 316. 4. Threaded ends according ISO 7-1 (EN 10226-1). 5. Stem Packing PTFE. 6. Max. Working pressure 16 bar. 7. Max. Working temperature 180 ºC. Read More: Steam Products ADCA
Model:
Features TDS controller Model BCS-211 Compatible with both SPS-21 and SPS-33 series conductivity probes. Relay (on/off) output and 4-20 mA transmitter output. Standard 35 mm rail fixation according to DIN EN 50022 or directly screwed to chassis plate. Allows quick performance tests by pressing and holding the “TEST K” button. Read more: Blowdown Water system...
Model:
Features Pneumatic Control Valves Model PPV25G Single seated, two ways, direct or reverse action valve. Soft sealing as standard. Actuator housing 360º rotation (clockwise). Specification Pneumatic Control Valves Model PPV25G Size: DN15 – DN50 Connection: Flanged EN1092-2 PN16 Maximum pressure: PN16 Maximum temperature: 300ºC Read More: Pneumatic Shut-off Valves (On/Off)
Model:
Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....
Model:
Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...
Model:
Specification Blowdown valve for Boiler VYC Model 460 Size: DN25 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 250ºC Read More: Steam Boiler Blowdown Valves
Model:
Features Pneumatic Control Valves Model PWV40I Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Stainless steel construction and soft sealing as standard. Specification Pneumatic Control Valves Model PWV40I Read More: Pneumatic control valves
Model:
Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...
Model:
Features Manual Blowdown Valve Model VPA26S High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Manual Blowdown Valve Model VPA26S Manual or automatic control. Size: DN20 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 400ºC Read More: Steam...
Model:
Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...
Model:
Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...
Model:
Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...
Model:
Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...
Model:
Feature Zetkama Bellow valve 234 High thightness (leakproofness class – A acc. EN -12266 – 1) Compact settlement Environment-friendly Tests acc. EN – 12266 – 1 Flanges drilled according to EN 1092-2 for body material A, C Flanges drilled according to EN 1092-1 for body material F Face-to-face dimension according to EN 558-1 series 1...
