Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0901 19 06 08
Read More: Steam Products ADCA
Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...
Features Self Operated Temperature Regulator Model TR40-TR40SS Single seated, two way, direct action valve. Leakage less than 0,05% of full Kv Use: Saturated and superheated steam/ Hot and superheated water Specification Self Operated Temperature Regulator Model TR40-TR40SS SIZES: DN15 to DN 25. CONNECTIONS: Flanged EN 1092-1 PN16 – PN40 CONTROL MODE: Proportional THERMOSTATS T.205 –...
Specification Round-Dowel Level Indicator Model 666 — Level gauges with replaceable floating or mobile needle seal and safety ball. Should the viewer break a pressure imbalance is caused which moves the ball onto the seating preventing the fluid from flowing out. — Gauge activation by means of a fast control lever. — Indiscriminate gauge assembly...
Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...
Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...
Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...
Specification Safety Valve Model 685 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance. Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Sealing surfaces balanced and making them extremely tightness, even exceeding API-527 requeriments. Great discharge capacity. For liquids typically used...
Feature Zetkama Bellow valve 234 High thightness (leakproofness class – A acc. EN -12266 – 1) Compact settlement Environment-friendly Tests acc. EN – 12266 – 1 Flanges drilled according to EN 1092-2 for body material A, C Flanges drilled according to EN 1092-1 for body material F Face-to-face dimension according to EN 558-1 series 1...
Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...
Features ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Read More: Pneumatic control valves
Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...
Features Piston Sensing Pressure Reducing Valve Model PRV31SS Compact design. Balanced valve plug. Machined from bar stock materials or investment casting. Specification Piston Sensing Pressure Reducing Valve Model PRV31SS Size: 1/2” and 3/4”; DN15 – DN50 Connection Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40 or PN 63. Flanged ASME B16.5...
Specification Safety Valve Muffler 005 ― Small, light design. The circular shape absorbs vibrations that could cause damage over time. ― Compact, robust construction permitting liquid expansion and rises in temperature in the silencer, practically without restrictions and without producing stress in the structure. ― A diffuser consisting of a suitable combination of holes and...
Features Diaphragm Sensing Pressure Sustaining Valve PS15SS Compact design. Machined from barstock materials. Specification Diaphragm Sensing Pressure Sustaining Valve PS15SS Size: DN8 – DN15 Connection Female screwed ISO7/1Rp(BS 21) or NPT. Flanged EN 1092-1 PN16/PN40 Special flanges upon request Working pressure: PN63 Maximum temperature: 80ºC Installation: Horizontal ORDER REQUIREMENTS: Type of fluid Read More: Steam...
Features Pneumatic Control Valves Model PWV40I Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Stainless steel construction and soft sealing as standard. Specification Pneumatic Control Valves Model PWV40I Read More: Pneumatic control valves
Features Blowdown Control Valves VPC-32 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves VPC-32 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS: Flanged EN 1092-1. ANSI Class 150 and 300 lbs....
Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...
Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...
