MUTEC provides continuous inline moisture measurement solutions for bulk solids, helping manufacturers monitor product moisture directly during production instead of relying only on periodic laboratory sampling. Moisture measurement is particularly important for materials such as grains, powders, pellets, wood, fertilizers, chemicals, food products, plastics, and other bulk materials, where moisture variations can directly affect product quality, drying efficiency, and production stability.
The HUMY 301 uses a capacitive measuring principle to determine the water content within the material, rather than measuring only surface moisture. The sensor field can penetrate up to approximately 200 mm into the bulk material, allowing real-time measurement directly in the product flow. It is suitable for installation on conveyor belts, screw conveyors, hoppers, and other process points. The measured moisture value can be used to continuously monitor production or control a dryer or automatic humidification system.
The HUMY 3000 uses a high-frequency measurement method that evaluates the material’s dielectric properties and signal attenuation to determine moisture. It is designed for a wide range of bulk-solid applications, including granules, pellets, chips, powders, and dusts. Typical installation locations include conveyor belts, screw conveyors, silos, and hoppers, with inline measurement also possible in batch processes. The system supports fast calibration, automatic temperature compensation, data logging, and storage of parameters for up to 24 products or product groups.
Together, HUMY 301 and HUMY 3000 give MUTEC a flexible approach to real-time moisture monitoring of bulk solids, helping plants reduce process fluctuations, avoid over- or under-drying, improve product consistency, and optimize energy consumption during drying. Both systems can achieve measurement accuracy of up to approximately 0.1% depending on the material and measurement conditions.
Ecozen – Authorized MUTEC Distribution & Technical Solutions
Ecozen is the official distributor of MUTEC in Vietnam, providing inline moisture measurement solutions for industrial bulk-solids processes. We do not simply supply a moisture sensor; Ecozen supports customers in selecting the appropriate measurement technology and installation method based on the material, moisture range, process flow, installation point, and control objective.
Why choose MUTEC at Ecozen:
- Official MUTEC distributor in Vietnam, ensuring product authenticity and quality
- Application-based consulting for conveyors, screw conveyors, silos, hoppers, dryers, and material handling systems
- Support in selecting between HUMY 301 capacitive measurement and HUMY 3000 high-frequency moisture measurement
- Support for calibration, process integration, and connection to control systems via available outputs
- Solutions for continuous monitoring, dryer control, automatic humidification, and production quality control
Ecozen helps businesses move from periodic moisture sampling toward continuous, real-time moisture monitoring, providing process data that can be used to respond faster to moisture variations and improve overall production efficiency.
Contact Ecozen via Zalo for technical consultation on the most suitable MUTEC moisture measurement solution for your bulk-solids process.
