Xem thêm

Model:

The AMF900 Series is a flange type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 10A to 2000 mm. AMF900 is widely used for sewage, industrial waste, chemical, solvent, food & beverage, pulp & paper and many other industrial fluid. AMF900 Series electromagnetic flowmeter could be used in compact or separate model...

RA Series Air Pad

Model:

Description RA series is an aerator product line designed to replace the escaped air into a powder material in a bin, silo or other type of vessel so that the material will become fluid again and flow. The RA series is complimentary to the BV series of industrial vibrators. The RA series is of a...

AE Series Controller for Dust Collector System

Model:

Specification AE Series Controller for Dust Collector System Digital display, provides easy operation and shows operating status. Precision microprocessor operation. Convenient control via remote control. Cyclic pulses can be performed automatically even after the system is turned off to prevent sediment from accumulating on the filter bag. The waterproof and dustproof housing prolongs the life...

BRD/BDV Series Diaphragm Valve

Model:

Feature BRD/BDV Series Diaphragm Valve Fluids: Air filtered and oil free air Diaphragm material: NBR Operation temp.: -20 ~ 85ºC Ambient temp.: -20 ~ 60ºC Read more: Pneumatic products

End device

Model:

Features Power Source: DC 9~30V Signal Input Interface: RS-485*1 RF Interface: 3.5mm SMA Female RF Band: ISM Band 2.4G

Router-FineTek Co., Ltd

Model:

Features Power Source: DC 9~30V RF Interface: 3.5mm SMA Female connector (ANT) RF Band: 2.4G ISM Band

Alia AMF301

Model:

Feature Alia AMF301 Specifications Alia AMF301 Read more: Electromagnetic Flowmeter

Coordinator

Model:

Features Power Source: DC 5V RF Interface: 3.5mm SMA Female connector (ANT) RF Band: ISM Band 2.4G Interface: USB

HubLink

Model:

Features Power Source: DC 9~30V Signal Input Interface: 1. RS-485*4 2. 4-20mA*4 3. 1 Wire* 4 4. I/O* 4 RF Interface: 3.5mm SMA Female connector (ANT) RF Band: 2.4G ISM Band or Quad band: GSM

Remote Control Unit

Model:

MMS-TLA Materials Management System

Model:

Description The MMS series materials management system includes the MMS-TL and MMS-TLA software systems designed to run on PC’s. The MMS-TL is a materials management system for use in monitoring tank level inventories of liquid or bulk solid materials using a wide variety of Aplus Finetek level transmitter technologies. The MMS-TLA is a materials management...

EST110 Multi-point temperature sensor

Model:

Feature EST110 Multi-point temperature sensor Reinforced steel cable design can effectively resist the impact of grain and prolong service life of the product. Provide multi-point temperature measurement to help managers cope with food more swiftly. Detect whether there is fungus produced or activities of insects, to maintain food quality. Provide real-time monitoring of silo temperature...

EST120 temperature & level monitoring transmitter

Model:

Feature EST120 temperature & level monitoring transmitter Reinforced steel cable design can effectively resist the impact of grain and prolong service life of the product. Provide multi-point temperature measurement to help managers cope with food more swiftly. Detect whether there is fungus produced or activities of insects, to maintain food quality. Provide real-time monitoring of...

GP/GK Series Thermocouple

Model:

Specifications GP/GK Series Thermocouple Materials: SUS 304/316, Titanium, PP, PTFE Operating Temperature: -50 ~ 500ºC Protection level: IP65, IP44 Certification: IEC Read more: Temperature

TR Series Temperature Transmitter

Model:

Specifications TR Series Temperature Transmitter Read more: Temperature

SQ Series Pressure Switch

Model:

Description SQ series is a pressure switch product line using an internal diaphragm that is exposed to process pressure via the pressure switch threaded process connection. Opposing the diaphragm is a compression spring. When the process pressure is greater than the force of the compression spring the switch contact will open or close depending on...

EE Series Electromechanical Level Measuring System

Model:

Description The EE300 series electromechanical inventory level measuring system is a flexible inventory system that can consist of the EE300 sensor(s) only or can include the remote control unit (RCU) or MMS-TL materials management PC-software. The EE300 is a third generation weight & cable inventory level measuring sensor consisting of a sensing weight, heavy duty...

Alia ADF9500

Model:

The ADF9500 Series is a transmitter of differential pressure flowmeter. Differential pressure can be converted into flow value via microcomputer technology and flowrate,totalizer. The differential pressure can be displayed directly in LCD screen. It’s equipped with strong output function: 4-20 mA, pulse and HART. ADF9500 is widely used in differential pressure sensors flowmeter such as...

EC Series Pressure Level Transmitter

Model:

Feature EC Series Pressure Level Transmitter There are various types of transducers, such as: transducer with extension cable/tube, Anti-corrosive type, flange type & pressure transducer. Can be equipped with digital panel meter, recorder, PLC, signal controller. The metal diaphragm is suitable in various environments such as weak acid and alkaline liquid or sewage water treatment....

EB5 Series RF-Capacitance Level Transmitter

Model:

Description The EB series RF admittance level transmitter measures the changing capacitance between the sensing probe and the reference ground to determine the level of the material in the vessel. When the sensing probe is in air only (no material around the sensing probe; vessel is empty), the amount of capacitance is measured. As the...

FG Series Magnetic Float Level Transmitter

Model:

Feature FG Series Magnetic Float Level Transmitter Optional TAB-2100 (see p4) to produce a 0/4~20mA signal 1 Optional PB series bargraphic display scaling panel meter for level control and display 1 Sensing elements are protected with a plastic package for safety in use and transport. 1 High performance and reliable electric circuit modular design (fig.2)...

EG Series Magnetostrictive Level Transmitter

Model:

Feature EG Series Magnetostrictive Level Transmitter Absolute positioning output and no calibration requiredafter power failure. Stability and reliablity. Ease installation without calibration & maintenance. Prompt response time, high resolution & high accuracy. Durable structure, dust-proof, withstands high pressure. Oil/water dual level indication. The Max. operation temp. is 200BC. EG31, 32, 36, 37 adopted loop power...

JFR Series FMCW Radar Level Transmitter

Model:

Feature JFR Series FMCW Radar Level Transmitter Non contact measuring Corrosive and toxic liquid, hydrocarbons, slurries Not affected by specific gravity, pressure, temperature, viscosity, foam, and dust 5 digits LCM display Indicate signal wave inside the silo. Selection of Different Measurement unit(m, cm, mm, inch, Ft, %, mA) Measuring distance and actual level. Language selection...

EAX Ultrasonic Level Transmitter

Model:

Features EAX Ultrasonic Level Transmitter 4~20mA 2 wire output (Fully isolated) with HART 7~30Vdc power supply IP67 protection casing Transducer material: PVDF False echo detection Internal temperature compensation. Beam angle: 7 Not affected by liquid temperature, S.G, viscosity Maximum range to 12 meters(40 ft). Specification EAX Ultrasonic Level Transmitter Read More: Liquid Level Transmitter

JTR Guided Wave Radar Level Transmitter

Model:

Features JTR Guided Wave Radar Level Transmitter Meets the various measurement requirements of different temperature, pressure and medium. Contact measuring, capable of overcoming the steam, foam and stirring effects. 4~20 mA / 2 lead wires, simple wiring, low power consumption (2.4W max.). 128*64 LCM Display, easy on-site adjustment. Display distance, level, percentage, current 4~20 mA....

SE Series Rotary Paddle Level Switch

Model:

Features SE Series Rotary Paddle Level Switch Rugged sealing ring prevents dust from infiltrating the housing body along the shaft. Adjustable torque. If the rotary paddle encounters overloading, the motor will automatically shut down the motor to prevent damage to the inner mechanisms and extend motor life. Very suitable for small tanks and low density materials...

SB Series RF-Capacitance/ Admittance Level Switch

Model:

Features SB Series RF-Capacitance/ Admittance Level Switch Time delay function from 0-30 seconds IP65 housing protection 5 A/250Vac output DPDT High/low failsafe Alarm testing Explosion Proof model available Anti-Viscosity Easy Installation Stable; Not affected by temperatureerature Highest temperatureerature tolerance of 550°C Explosion-proof 450°C Applicable in liquid, syrup, solid, powder,and surface level detection Applications SB Series...

SA Series Capacitance Level Switch

Model:

Features SA Series Capacitance Level Switch As Capacitance Level Switch has no moving parts inside the device, it will not be affected by friction. It is suitable for powder or liquid application easy to install. The customer can choose the types for his requirements. 1. Standard Type (SA110 & SA111) Suitable for general use. 2....

Đồng hồ đo lưu lượng khí gas - Smart target flowmeter ATF80 series

Smart Target Flowmeter Alia ATF80

Model:

Features Smart Target Flowmeter Alia ATF80 Measure low velocity less than 0.1 m/s Measure high-temp., low-press. and low-velocity flare gas. 4-20 mA output Hart communication Low-Pressure drop The Max. temperature can be up to 450°C Online calibration by Alia’unique software Insertion Type or Hot-Tap Type available for large pipeline Specification Smart Target Flowmeter Alia ATF80...

SC Series Vibrating Probe Level Switch

Model:

Features SC Series Vibrating Probe Level Switch Voltage supply range 20~250, 50~60Hz Vac/ Vdc. SPDT Relay output, SSR MOSFET output. Sensitivity adjustment is available for different density mediums. Low wear and tear, maintenance free and self cleaning. Fine powders can be detected. Euro and UL certified Models available. Specification SC Series Vibrating Probe Level Switch Applications...

FA/FB Series Cable Float Level Switch

Model:

Specification FA/FB Series Cable Float Level Switch Applications FA/FB Series Cable Float Level Switch FAC: Suitable for pump controlled systems FAR/ P / D/ E: Suitable for pump controlled waste water with a low Specific Gravity (SG level). FAS: High temperature solutions FAL/ J: Cleaner water, and installation with smaller process connections. It is suggested...

SD Series Optical Level Switch

Model:

Features SD Series Optical Level Switch Simple and compact with no moving parts LED indication 10-28VDC, 115VAC or 230VAC powered versions Solidstate NPN/PNP or relay output Operating temperatures up to 257⁰F (125⁰C) Wide range of use in machine systems for a variety of liquid level detection Unique SD22 design, switch body and tip disconnects Applications...

SC Series Tuning Fork Level Switch

Model:

Features SC Series Tuning Fork Level Switch SPDT Relay output, SSR MOSFET output. Wide voltage supply range 20~250 Vac/Vdc,50/60Hz No frequent calibration is required, easy-to-use, sturdy and durable design. High/low failure safe mode, safe and reliable. Sensitivity adjustment is available for different densities of media. Fine powder can be detected. Suitable for liquid, powder, and...

SIS Sanitary Intelligent Level Switch

Model:

Features SIS Sanitary Intelligent Level Switch Easy installation by standard connection with IP67/IP68/IP695 as protection grade. Compact design, easy carry; can be installed in narrow space or stringent operation condition. The surface roughness (Ra) can be customized and applicable for Chemical & pharmaceutical and food processing industries. With magnetic test function to examine wiring and...

Zetkama stop valve 217

Model:

Features Zetkama stop valve 217 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • weld ends according to EN 12627 Specification Zetkama stop valve 217...

Zetkama Bellow valve 237

Model:

Features Zetkama stop valve 237 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • weld ends according to EN 12627 Specification Zetkama stop valve 237...

Zetkama Bellow valve 235

Model:

Features Zetkama stop valve 235 • high tightness (leakproofness class – A acc. EN -12266 – 1) • compact settlement • environment-friendly • tests acc. EN – 12266 – 1 • flanges drilled according to EN 1092-2 • face-to-face dimension according to EN 558 series 8 Specification Zetkama stop valve 235 Material: Cast Iron Size:...

Alia ATF2000

Model:

ATF2000 Series thermal mass flow meter is designed on the basis of thermal dispersion. It adopts method of constant differential temperature to measuring gas flow. It has the advantages of small size, high digitization, easy installation and high accuracy. ATF2000 is a multi-functional thermal mass flow meter that measures mass flow and volume flow. With...

Alia AST420

Model:

The AST420 Series Signal Converter is a device facilitates the conversion between analog signal an radio signal. It aims to convert 4-20 mA analog signal into radio signal to transmit the analog signal remotely without cable, which is widely used in the occasion of transmitting analog signals over long distances. The wireless communication distance is...

Alia APT3000

Model:

The APT3000 Series pressure transmitter for general industrial application is the ideal solution for customers with demanding measuring requirements. APT3000 very high quality product,which even the most adverse environmental conditions cannot affect. The APT3000 offers continuous measuring ranges between 0-0.16 and 0-1000 bar in all the major units. These measuring ranges can be combined in...