Specification Bellow Seal Globe Valve Model FIG.61
- Material: Cast Iron
- Size: DN15 – DN200
- Connection: flange
- Maximum pressure: PN16
- Operating Temperature: -10 ~ 300ºC
Read More: Steam Products ADCA
Bellow Seal Globe Valve Model FIG.61
Thông tin cơ bản
Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0901 19 06 08
Sản phẩm tương tự
Related products
Model:
Features Clean Steam Separator Model S-10H 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Separator Model S-10H SIZES: 1/2” to 3”. PIPE CONNECTIONS: Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to ISO 14644-1....
Model:
Features Pneumatic Control Valves Model PV16G Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic Control Valves Model PV16G Read More: Pneumatic control valves
Model:
Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...
Model:
Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...
Model:
Features Diaphragm Sensing Pressure Sustaining Valve PS15SS Compact design. Machined from barstock materials. Specification Diaphragm Sensing Pressure Sustaining Valve PS15SS Size: DN8 – DN15 Connection Female screwed ISO7/1Rp(BS 21) or NPT. Flanged EN 1092-1 PN16/PN40 Special flanges upon request Working pressure: PN63 Maximum temperature: 80ºC Installation: Horizontal ORDER REQUIREMENTS: Type of fluid Read More: Steam...
Model:
Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...
Model:
Features Pressure Reducing Valve Model P20P Compact design. Machined from barstock materials No rising handwheel Ultrasonically cleaned and degreased Specification Pressure Reducing Valve Model P20P Size: 1/4″ Connection Female screwed ISO7/1Rp(BS 21) or NPT. Special connections on request Working pressure: PN320 Maximum temperature: 80ºC INSTALLATION: In any position Read More: Steam Products ADCA
Model:
Pneumatic Control Ball Valve Genebre Model 5025 Material: Stainless Steel Size: DN15 – DN50 Connection: Threaded Maximum pressure: 63bar Operating Temperature: -25 ~ 180ºC Read More: Pneumatic control valves
Model:
Features Automatic Blowdown Valve Model VPA26S High-quality hardened valve seat and plug. Manual or automatic intermittent timed control. Lockable in open position if supplied with manual operation lever. Practical foot operated lever. Maintenance free stem sealing. Tool-free quick exchangeable clamped-in seats, allowing fast and easy in-site maintenance procedures. Specification Automatic Blowdown Valve Model VPA26S Manual...
Model:
Features Self Operated Temperature Regulator Model TR40-TR40SS Single seated, two way, direct action valve. Leakage less than 0,05% of full Kv Use: Saturated and superheated steam/ Hot and superheated water Specification Self Operated Temperature Regulator Model TR40-TR40SS SIZES: DN15 to DN 25. CONNECTIONS: Flanged EN 1092-1 PN16 – PN40 CONTROL MODE: Proportional THERMOSTATS T.205 –...
Model:
Features Pneumatic Control Valves Model PPV25G Single seated, two ways, direct or reverse action valve. Soft sealing as standard. Actuator housing 360º rotation (clockwise). Specification Pneumatic Control Valves Model PPV25G Size: DN15 – DN50 Connection: Flanged EN1092-2 PN16 Maximum pressure: PN16 Maximum temperature: 300ºC Read More: Pneumatic Shut-off Valves (On/Off)
Model:
Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...
Model:
Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...
Model:
Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...
Model:
Specification Circular Transparent Lenses Model 006 — Boron silicate glass of high chemical stability. — Of great purity and homogeneity. — Low thermal expansion coefficient. — Thermally prestressed which guarantees high mechanical resistance. — High resistance to sharp changes of temperature, pressure and chemical aggression, guaranteeing a long life. — Joint surfaces are perfectly flat....
Model:
Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...
Model:
Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....
Model:
Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...
