Filter

Thermodynamic Steam Traps Model DT40S

Thông tin cơ bản

Tư vấn sản phẩm/hỗ trợ kỹ thuật

Email: contact@eco-genergy.com

Hotline: 0901 19 06 08

Báo giá Tải Catalog

Features Thermodynamic Steam Traps Model DT40S

  • Intermittent discharge.
  • Operates on superheated steam.
  • The disc can be easily replaced in field
  • without removing the trap from the line.
  • Unaffected by water-hammer and vibrations.
  • Integral seat.

Specification Thermodynamic Steam Traps Model DT40S

  • SIZES: DN3/8” to DN 1”
  • CONNECTIONS: Female screwed ISO7/1 Rp (BS21)
  • INSTALLATION
    • Horizontal installation recommended.
    • Can be installed in any position.
  • APPLICATION LIMITS
    • Min-working pressure – 0,25 bar
    • Max. working back pressure – 80%
  • PMA – Max. allowable pressure 63 bar
  • TMA – Max. allowable temperature 400 ºC
  • PMO – Max. operating pressure 40 bar
  • TMO – Max. operating temperature 350 ºC

Read more:Thermodynamic steam traps

Nút download

Sản phẩm tương tự

Related products

Van góc điều khiển khí nén ADCA

Pneumatic Angle Type Interception Valve Model PAV21

Model:

Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...

Van cầu hơi Zetkama 234

Zetkama Bellow valve 234

Model:

Feature Zetkama Bellow valve 234 High thightness (leakproofness class – A acc. EN -12266 – 1) Compact settlement Environment-friendly Tests acc. EN – 12266 – 1 Flanges drilled according to EN 1092-2 for body material A, C Flanges drilled according to EN 1092-1 for body material F Face-to-face dimension according to EN 558-1 series 1...

Manual Blowdown Valve Model VPA26S

Manual Blowdown Valve Model VPA26S

Model:

Features Manual Blowdown Valve Model VPA26S High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Manual Blowdown Valve Model VPA26S Manual or automatic control. Size: DN20 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 400ºC Read More: Steam...

Van xả TDS Adca Model VPC-32

Blowdown Control Valves VPC-32

Model:

Features Blowdown Control Valves VPC-32 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves VPC-32   VALVE SIZES: DN15,20,25 and 40. CONNECTIONS:  Flanged EN 1092-1. ANSI Class 150 and 300 lbs....

Van điều khiển khí nén dạng màng, áp suất cao ADCA

Pneumatic Control Valves Model PA45

Model:

Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...

Mặt kính thủy lò hơi VYC Model 066

Reflection And Transparency Glasses Model 066

Model:

Specification Reflection And Transparency Glasses Model 066 — Boron silicate glass of high chemical stability. — Of great purity and homogeneity. — Low thermal expansion coefficient. — Thermally prestressed which guarantees high mechanical resistance. — High resistance to sharp changes of temperature, pressure and chemical aggression, guaranteeing a long life. — Joint surfaces are perfectly...

Van xả TDS Adca Model VPC-25

Blowdown Control Valves Model VPC-25

Model:

Features Blowdown Control Valves Model VPC-25 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves Model VPC-25 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS:  Flanged EN 1092-1. ANSI Class 150 and 300...

Bộ Giảm Thanh cho Van An Toàn - Safety Valve Muffler 005

Safety Valve Muffler 005

Model:

Specification Safety Valve Muffler 005 ― Small, light design. The circular shape absorbs vibrations that could cause damage over time. ― Compact, robust construction permitting liquid expansion and rises in temperature in the silencer, practically without restrictions and without producing stress in the structure. ― A diffuser consisting of a suitable combination of holes and...

Van điều khiển khí nén ADCA

Pneumatic Control Valves Model PV16G

Model:

Features Pneumatic Control Valves Model PV16G Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic Control Valves Model PV16G Read More: Pneumatic control valves

Bộ tách ẩm vi sinh ADCA - Clean Steam Separator Model S-10H

Clean Steam Separator Model S-10H

Model:

Features Clean Steam Separator Model S-10H 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Separator Model S-10H SIZES: 1/2” to 3”.  PIPE CONNECTIONS:  Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to ISO 14644-1....

Bộ điều khiển TDS Adca Model BCS-211

TDS controller Model BCS-211

Model:

Features TDS controller Model BCS-211 Compatible with both SPS-21 and SPS-33 series conductivity probes. Relay (on/off) output and 4-20 mA transmitter output. Standard 35 mm rail fixation according to DIN EN 50022 or directly screwed to chassis plate. Allows quick performance tests by pressing and holding the “TEST K” button. Read more: Blowdown Water system...

Van xả đáy lò hơi VYC Model 460

Blowdown valve for Boiler VYC Model 460

Model:

Specification Blowdown valve for Boiler VYC Model 460 Size: DN25 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 250ºC Read More: Steam Boiler Blowdown Valves

Bẫy hơi nhiệt tĩnh vi sinh Adca Model TSS6

Thermostatic clean steam trap Model TSS6

Model:

Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...

Van giảm áp Adca Model RP45I ANSI150/300

Pressure reducing valve Model RP45I ANSI150/300

Model:

Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...

VAN BI ĐIỀU KHIỂN KHÍ NÉN

Pneumatic Control Ball Valve Genebre Model 5025

Model:

Pneumatic Control Ball Valve Genebre Model 5025 Material: Stainless Steel Size: DN15 – DN50 Connection: Threaded Maximum pressure: 63bar Operating Temperature: -25 ~ 180ºC Read More: Pneumatic control valves

Van giảm áp trực tiếp – Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Model:

Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...

Van điều khiển khí nén ON/OFF dạng màng Adca Model PV25G

ON-OFF Diaphragm Pneumatic Control Valve Model PV25G

Model:

Features ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Read More: Pneumatic control valves

Van giảm áp vi sinh Adca Model P-130

Pressure Reducing Valve Model P-130

Model:

Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....

Van an toàn VYC Model 685 ASME

Safety Valve Model 685

Model:

Specification Safety Valve Model 685 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance. Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Sealing surfaces balanced and making them extremely tightness, even exceeding API-527 requeriments. Great discharge capacity. For liquids typically used...

Pneumatic valve control output Model PV25G

Pneumatic valve control output Model PV25G

Model:

Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...

Hỗ trợ kỹ thuật / tư vấn báo giá

0901 19 06 08

    Chat Zalo
    Gọi 0901 19 06 08