Remote Control Unit
Thông tin cơ bản
Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0901 19 06 08
Sản phẩm tương tự
Related products
Model:
Features Zetkama stop valve 217 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • weld ends according to EN 12627 Specification Zetkama stop valve 217...
Model:
Feature Strainer 821 Screen made of stainless steel (from DN 50 with reinforced ring, from DN 150 with supporting basket) Compact settlement Environment-friendly Cleaning of screen without disassembling Face-to-face dimension according to EN 558 series 1 Flanges drilled according to EN 1092-1 for body material F Flanges drilled according to EN 1092-2 for body material...
Model:
Features FC/FD Series Magnetic Float Level Switch Multiple points measuring, multiple level points could be for custom-made. Employing the magnet to actuate the reed switch requires no power. Life expectancy of each contact can reach up to 2 million times. All output signal wiring are simplified in same junction box (housing) to economize the external...
Model:
Description The MMS series materials management system includes the MMS-TL and MMS-TLA software systems designed to run on PC’s. The MMS-TL is a materials management system for use in monitoring tank level inventories of liquid or bulk solid materials using a wide variety of Aplus Finetek level transmitter technologies. The MMS-TLA is a materials management...
Model:
Features Gate valve 111 high tightness (leakproofness class – A acc. EN -12266 – 1) face of face dimensions: series 14 acc EN 558-1, F4 acc. to DIN 3202 flange end connections: EN-1092-2 fusion bonded epoxy coating RAL 5002 coating thickness: 300µm prepared for actuator mounting Specification Gate valve 111 Material: Cast Iron Size: DN40...
Model:
Features SC Series Tuning Fork Level Switch SPDT Relay output, SSR MOSFET output. Wide voltage supply range 20~250 Vac/Vdc,50/60Hz No frequent calibration is required, easy-to-use, sturdy and durable design. High/low failure safe mode, safe and reliable. Sensitivity adjustment is available for different densities of media. Fine powder can be detected. Suitable for liquid, powder, and...
Model:
Features Check Valve 302 • closing tightness acc. to EN -12334 • compact settlement • environment-friendly • no maintenance • flanges drilled according to EN 1092-2 • face-to-face dimension according to EN 558 series 48 Specification Check Valve 302 Material: Cast Iron Size: DN40 – DN300 Connection: Flange Maximum pressure: PN16 Operating Temperature: -10 ~...
Model:
Features Zetkama stop valve 215 • high tightness (leakproofness class – A acc. to EN – 12266 – 1 • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • flanges drilled according to EN 1092-2 for body material A, C,...
Model:
Features Zetkama stop valve 235 • high tightness (leakproofness class – A acc. EN -12266 – 1) • compact settlement • environment-friendly • tests acc. EN – 12266 – 1 • flanges drilled according to EN 1092-2 • face-to-face dimension according to EN 558 series 8 Specification Zetkama stop valve 235 Material: Cast Iron Size:...
Model:
Features Zetkama Safety valve 775 Valves made according to PN EN ISO 4126-1 High tightness Specification Zetkama Safety valve 775 Size: DN20 – DN32 Connection: Threaded Working pressure: PN16 Operating Temperature: -10 ~ 200°C Degree of protection: IP67, IP68 Read More: Zetkama Valves
Model:
Features Air release valve 918 • high tightness • compact settlement • environment-friendly • no maintenance Specification Air release valve 918 Size: DN25 Connection: threaded Maximum pressure: PN 16 Operating Temperature: -10 ~ 100°C Material: Cast Iron Read More: Zetkama Valves
Model:
Features Zetkama Safety valve 240 connection dimensions of flanges PN-EN 1092 • valves produced in accordance with the requirements of PN-EN ISO 4126-1 • a high degree of tightness In the case of valves with soft seals: • quiet operation of the valve • increased tightness of the closure • protection of disc sealing surface...
Model:
Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...
Model:
Features Rubber expansion joint 701 • galvanized iron thread • easy to install Specification Rubber expansion joint 701 Size: DN20 – DN80 Connection: threaded Maximum pressure: PN16 Operating Temperature: -20 ~ 100°C Material: EPDM Read More: Flexible hose
Model:
Features SD Series Optical Level Switch Simple and compact with no moving parts LED indication 10-28VDC, 115VAC or 230VAC powered versions Solidstate NPN/PNP or relay output Operating temperatures up to 257⁰F (125⁰C) Wide range of use in machine systems for a variety of liquid level detection Unique SD22 design, switch body and tip disconnects Applications...
Model:
Features Static balancing valve 221 High tightness (leakproofness class – A acc. to EN – 12266-1) High reliability measurement of differential pressure at calibrated Venturi orifice Kvs Ergonomic handwheel with exact setting scale Environment-friendly Setting lock possibility Face to face dimension (M4 series acc. to DIN 3202) Read more: Zetkama Valves
Out of stock
Model:
Features Zetkama stop valve 201 • high tightness (leakproofness class – A acc. to EN -12266 – 1) • compact settlement • environment-friendly • tests acc.to EN – 12266 – 1 Specification Zetkama stop valve 201 Material: Cast Iron Size: DN10 – DN50 Connection: Threaded connection Maximum pressure: PN16 Operating Temperature: -10 ~ 200°C Use...
Model:
Features Zetkama stop valve 216 High tightness (leakproofness class – A acc. to EN -12266 – 1) Compact settlement Environment-friendly Tests acc. to EN – 12266 – 1 Flanges drilled according to EN 1092-2 Face-to-face dimension according to EN 558 series 8 Specification Zetkama stop valve 216 Material: Cast Iron/Bronze Size: DN15 – DN300 Connection:...
Model:
Features Gate valve 019 • face-to-face length according to PN EN 558:2008 FTF N.14 • flanges with faying surfaces (type B) are drilled according to PN EN 1092-2: – for gate valves DN 700 – 1000 are drilled on PN10 – for gate valves DN 1200 – 1400 are drilled on PN2,5 • wheel for...
