TX10 Series Isolated safety barrier
Thông tin cơ bản
Tư vấn sản phẩm/hỗ trợ kỹ thuật
Email: contact@eco-genergy.com
Hotline: 0901 19 06 08
Sản phẩm tương tự
Related products
Model:
Features Zetkama Safety valve 240 connection dimensions of flanges PN-EN 1092 • valves produced in accordance with the requirements of PN-EN ISO 4126-1 • a high degree of tightness In the case of valves with soft seals: • quiet operation of the valve • increased tightness of the closure • protection of disc sealing surface...
Model:
Features Gate valve 111 high tightness (leakproofness class – A acc. EN -12266 – 1) face of face dimensions: series 14 acc EN 558-1, F4 acc. to DIN 3202 flange end connections: EN-1092-2 fusion bonded epoxy coating RAL 5002 coating thickness: 300µm prepared for actuator mounting Specification Gate valve 111 Material: Cast Iron Size: DN40...
Model:
Features Zetkama stop valve 215 • high tightness (leakproofness class – A acc. to EN – 12266 – 1 • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • flanges drilled according to EN 1092-2 for body material A, C,...
Model:
Features SIS Sanitary Intelligent Level Switch Easy installation by standard connection with IP67/IP68/IP695 as protection grade. Compact design, easy carry; can be installed in narrow space or stringent operation condition. The surface roughness (Ra) can be customized and applicable for Chemical & pharmaceutical and food processing industries. With magnetic test function to examine wiring and...
Model:
Features Zetkama stop valve 217 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • weld ends according to EN 12627 Specification Zetkama stop valve 217...
Model:
Features Check Valve 302 • closing tightness acc. to EN -12334 • compact settlement • environment-friendly • no maintenance • flanges drilled according to EN 1092-2 • face-to-face dimension according to EN 558 series 48 Specification Check Valve 302 Material: Cast Iron Size: DN40 – DN300 Connection: Flange Maximum pressure: PN16 Operating Temperature: -10 ~...
Model:
Features Gate valve 112 • high tightness (leakproofness class – A acc.to EN -12266 – 1) • tests acc. to EN – 12266 – 1 • face of face dimensions: series F5 acc. to DIN 3202 • flange and connections: EN-1092-2, DIN 2501 • fusion bonded polyester coating RAL 5015 or other acc. to customer’s...
Model:
Features Rubber expansion joint 700 • galvanized carbon steel flanges • easy to install • flanges drilled according to EN-1092-1 Specification Rubber expansion joint 700 Size: DN32 – DN600 Connection: Flange Maximum pressure: DN32 – DN300: PN16 DN 350 – DN 600: PN10 Maximum temperature: 100°C Read More: Flexible hose
Model:
Features Zetkama stop valve 237 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • compact settlement • environment friendly • tests acc. to EN – 12266 – 1 • face-to-face dimension according to EN 558 series 1 • weld ends according to EN 12627 Specification Zetkama stop valve 237...
Model:
Features ED Series Speed Monitor Maximum monitoring range 1~999rpm. 7-seg led display 0~999 Alarm monitoring: low speed, stop, reverse, blackout and overload. Start up delay function allow motor to run up gradually. Alarm delay function can avoid fault alarm which many caused by temporary slow down or load changed. Selectable rotate direction for both CCW...
Model:
Features Static balancing valve 221 High tightness (leakproofness class – A acc. to EN – 12266-1) High reliability measurement of differential pressure at calibrated Venturi orifice Kvs Ergonomic handwheel with exact setting scale Environment-friendly Setting lock possibility Face to face dimension (M4 series acc. to DIN 3202) Read more: Zetkama Valves
Model:
Features Air release valve 917 • high tightness • compact settlement • environment-friendly • no maintenance • flanges drilled acc. to EN 1092-2 Specification Air release valve 917 Size: DN25 Connection: flange Maximum pressure: PN 16 Operating Temperature: -10 ~ 100°C Material: Cast Iron Read More: Zetkama Valves
Model:
Features Gate valve 021 face-to-face length according to PN EN 558:2008 FTF N.14 flanges with faying surfaces (type B1) are drilled according to PN EN 1092-2: for gate valves DN 700 – 1000 are drilled on PN10 for gate valves DN 1200 – 1400 are drilled on PN 2,5 wheel for hand operation can be...
Model:
Features Gate valve 019 • face-to-face length according to PN EN 558:2008 FTF N.14 • flanges with faying surfaces (type B) are drilled according to PN EN 1092-2: – for gate valves DN 700 – 1000 are drilled on PN10 – for gate valves DN 1200 – 1400 are drilled on PN2,5 • wheel for...
Model:
Features Rubber expansion joint 701 • galvanized iron thread • easy to install Specification Rubber expansion joint 701 Size: DN20 – DN80 Connection: threaded Maximum pressure: PN16 Operating Temperature: -20 ~ 100°C Material: EPDM Read More: Flexible hose
Out of stock
Model:
Features Zetkama stop valve 201 • high tightness (leakproofness class – A acc. to EN -12266 – 1) • compact settlement • environment-friendly • tests acc.to EN – 12266 – 1 Specification Zetkama stop valve 201 Material: Cast Iron Size: DN10 – DN50 Connection: Threaded connection Maximum pressure: PN16 Operating Temperature: -10 ~ 200°C Use...
Model:
Features Zetkama Safety valve 781 • valves made according to PN EN ISO 4126-1 • high tightness For valve with soft sealing • quiet work of valve • raised tightness of closure • protection of disc sealing surface against limescale settling as well as against any small mechanical dirt Specification Zetkama Safety valve 781 Material:...
Model:
Features Float valve 274 • high tightness (leakproofness class – A acc. to EN – 12266 – 1) • environment-friendly • no maintenance • flanges drilled according to EN 1092-2 • face-to-face dimension according to EN 558-1 series 8 Specification Float valve 274 Size: DN25 – DN200 Connection: Flange Maximum pressure: PN10 Maximum temperature: -10...
Model:
Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...
