Special Equipments

Xem thêm

Model:

Hot Condensate Coolers Adca Model HCC The HCC is a cooling device that allows the mixing of hot condensate with a lower temperature condensate, avoiding hammering. Condensate discharge from higher pressure lines (drip points, for instance) is often connected to low-pressure condensate lines, with lower temperatures. This sudden pressure drop will convert the sensible heat...

Automatic Pump And Steam Trap Adcamat APST

Model:

Features Automatic Pump And Steam Trap Adcamat APST No electric requirements. No NPSH issues. Operation under vacuum conditions. No motive or flash steam is lost. Low filling head for minimal installation space requirements Specification Automatic Pump And Steam Trap Adcamat APST SIZES 2” x 2” and 3” x 2”. DN 50 x 50 and DN...

Packaged Adcamat Automatic Pump

Model:

Packaged Adcamat Automatic Pump POPK-SD (Duplex) & POPK-ST (Triplex)

Model:

PRESSURE OPERATED PUMP ADCAMAT POP-S

Model:

Water Saving Jet-Spray Gun Adcamix SG20

Model:

SpecificationWater Saving Jet-Spray Gun Adcamix SG20 Size: DN15 Maximum temperature: 95ºC Use: cold water and hot water Read More: Special Equipments

Steam Water Mixers Adcamix Model MX20

Model:

Features Steam Water Mixers Adcamix Model MX20 Safety device against accidentally steam ejection. Non return valves included. Complete stainless steel construction. Quiet operation. Specification Steam Water Mixers Adcamix Model MX20 Dimensions: 3/4″ x 3/4″ Connection: Thread Maximum pressure: 10 bar Maximum temperature: 95ºC Steam – Water mixer: to create hygienic hot water. Read More: Special...

Flash Vessels RV

Model:

Features Flash Vessels RV Several possibilities of installation and special sizes and types (available on request). Specification Flash Vessels RV SIZES: RV06, RV08, RV12, RV16 and RV18 CONNECTIONS Flanged EN 1092-1 PN 16 Special flanges upon request INSTALLATION Vertical installation. Horizontal condensate inlet and outlet or alternative horizontal inlet and vertical condensate outlet. Maximum pressure:...

Adcatherm Boiler Feed Tanks BFT

Model:

Features Adcatherm Boiler Feed Tanks BFT Sandblasted and metalized internally and externally (externally painted). Prevents energy wasting Can be installed on new or existing systems Specification Adcatherm Boiler Feed Tanks BFT Capacity: 500 – 6000 liters Maximum pressure: 6bar Operating Temperature: -10 ~ 120ºC CONNECTIONS Flanges EN1092-1 PN16 or ANSI. Sockets BSP or NPT Different...

Steam Header – Steam Distribution Manifold Mas

Model:

Features Steam Header – Steam Distribution Manifold Mas Several installation possibilities Reduced field assembly costs by means of prefabrication. Specification Steam Header – Steam Distribution Manifold Mas SIZES: DN100 to DN300 CONNECTIONS Flanged EN 1092-1 PN16 and PN40 ANSI Class 150 lbs and Class 300 lbs Female screwed BSP or NPT on request. INSTALLATION: Always...

Steam Injectors SI

Model:

Steam Injectors Model SI 115

Model:

Features Steam Injectors Model SI 115 Quiet operation. Corrosion-resistant. No moving parts. Specification Steam Injectors Model SI 115 SIZES: 1/2” CONNECTIONS: Female screwed ISO 7/1 Rp (BS21) INSTALLATION: Horizontal installation. LIMITING CONDITIONS: Body design conditions : PN 25 Max. operating pressure : 17 bar Max. recommended water temp: 95 ºC MATERIALS: Austenitic stainless steel throughout...

Lifting Pots LIPO

Model:

Specification Lifting Pots LIPO OPTIONS: Stainless steel construction. USE: Condensate lines where condensate has to be lifted. SIZES: DN 15 to DN100 CONNECTIONS: Flanged EN1092-1 or ANSI. Different connections on request. CONSTRUCTION: Carbon steel or stainless steel under request. INSTALLATION: Vertical installation (inlet/outlet angle connections) The differential pressure must be enough to overcome the pressure...

FRECO – Flash steam and condensate heat recovery

Model:

Features Different kinds of materials and designs available, according to the application. Specification OPTIONS: Atmospherically vented units, to avoid extra back pressure in the condensate return system. USE: Steam, water, hot condensate and other fluids compatible with the construction. ORDER REQUIREMENTS: Condensate flow rate and temperature Make-up water flow rate and temperature Operating pressures Steam...

PAT Series Plate Heat Exchangers

Model:

Features PAT Series Plate Heat Exchangers Corrosion-resistant stainless steel plates Highly efficient heat transfer (K-values much higher comparing with shell and tube design) Less area required for installation Low liquid content Additional capacity available by fitting extra transfer plates Specification PAT Series Plate Heat Exchangers OPTIONS : Special designs and materials (titanium, etc). Brazed construction...

Pressure Reducing Valve Model P-130

Model:

Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....

Thermostatic clean steam trap Model TSS6

Model:

Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...

Pressure reducing valve Model RP45I ANSI150/300

Model:

Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...

Sanitary pressure reducing valve P160

Model:

Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...

High purity ball valves M3HP True bore

Model:

Features High purity ball valves M3HP True bore True bore floating ball design. Completely made from solid bar stock material. Can be serviced without removal from pipeline. Bidirectional. Anti blow out proof stem. Tube weld with loose body flanges. (360º rotation after installation). ISO 5211 mounting (only sizes ≥1”). Specification High purity ball valves M3HP...

Culinary steam filter ISC16

Model:

Features Culinary steam filter ISC16 Several retention rates available. Good durability against aggressive gases. Porosity level is more than 50% ensuring high particle and dirt load capacity as well as good flow rate at a low differential pressure. Regeneration by ultrasonic bath. Specification Culinary steam filter ISC16 Internal parts: ≤ 0,76 mícron Ra – SF3....

Sample coolers SC32P – SC32PP

Model:

Features Sample coolers SC32P – SC32PP Corrosion-resistant body and internals. Self draining sample (inlet top, outlet bottom). Specification Sample coolers SC32P – SC32PP Internal wetted parts: ≤ 0,51 micron Ra – SF1. External: ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00-Technical information. Ultrasonic cleaning. OPTIONS: Different connection sizes and materials USE: ...

Clean Steam Trap TSS6A

Model:

Features Clean Steam Trap TSS6A Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design. Specification Clean Steam Trap TSS6A OPTIONS: Special designs under request USE: Saturated clean steam. AVAILABLE MODELS: TSS6A Inlet and outlet angle TSS6AI Inlet angle straight outlet TSS6AO Inlet straight outlet angle SIZES: ½” and ¾”. CONNECTIONS: ...

Tds Conductivity Probe In-Line Conductivity Measurement SPS-21

Model:

Specification Tds Conductivity Probe In-Line Conductivity Measurement SPS-21 OPTIONS: Flanged sensor chamber USE: Superheated boiler water and condensate SIZES: DN ½” PIPE CONNECTIONS: Screwed ISO 7/1 RP (BS21) ELECTRICAL CONNECTIONS: Plug connection with screw terminals, traction relief INSTALLATION: Horizontal or vertical installation Read more: Blowdown Water system & control

Tds Conductivity Probe Direct Boiler Conductivity Measurement Model SPS-33

Model:

Specification Tds Conductivity Probe Direct Boiler Conductivity Measurement Model SPS-33 OPTIONS: Tee piece type F-3220 for boiler and blowdown valve connection USE: Superheated boiler water and condensate SIZES: DN ½” PIPE CONNECTIONS: Screwed ISO 7/1 RP (BS21) ELECTRICAL CONNECTIONS: Plug connection with screw terminals, traction relief INSTALLATION: Horizontal or vertical installation Read more: Blowdown Water...

Humidity Separators Model S25/S or S16/S or SH25/S

Model:

Features Humidity Separators Model S25/S or S16/S or SH25/S Several possibilities of installation. No moving parts. Maintenance-free design. Specification Humidity Separators Model S25/S or S16/S or SH25/S OPTIONS: Condensate flanged connection. USE: Steam, compressed air and other gases. AVAILABLE MODELS: S25/S – carbon steel. SIZES: DN 15 to DN 300. CONNECTIONS: Flanged EN 1092-1 PN...

Humidity Separator with Strainer Model S252/F

Model:

Features Humidity Separator with Strainer Model S252/F Several possibilities of installation. No moving parts. Stainless steel strainer screen included Specification Humidity Separator with Strainer Model S252/F SIZES: DN15 to DN300. PIPE CONNECTIONS: Flanged EN1092-1 PN16 and PN40 ANSI Class 150 lbs and Class 300 lbs Female screwed BSP or NPT on request INSTALLATION: Always with...

Humidity Separator and Strainer Model SF251/S

Model:

Features Humidity Separator and Strainer Model SF251/S Several possibilities of installation. No moving parts. Stainless steel strainer screen included Specification Humidity Separator and Strainer Model SF251/S SIZES: DN15 to DN100. PIPE CONNECTIONS: Flanged EN1092-1 PN16 and PN40 ANSI Class 150 lbs and Class 300 lbs Female screwed BSP or NPT on request. INSTALLATION: Always with...

Clean Steam Separator S-10

Model:

Features Clean Steam Separator S-10 316L stainless steel construction Several possibilities of installation. No moving parts. Self draining design Specification Clean Steam Separator S-10 SIZES: DN1/2”, 3/4”,1”, 11/2” and 2” PIPE CONNECTIONS: Clamp ends or others on request INSTALLATION: Always with the condensate discharge pointing downwards. HOW TO SELECT: Generally, in an existing plant it...

Clean Steam Separator Model S-10H

Model:

Features Clean Steam Separator Model S-10H 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Separator Model S-10H SIZES: 1/2” to 3”. PIPE CONNECTIONS: Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to ISO 14644-1....

Clean Steam Centrifugal Separator S11

Model:

Features Clean Steam Centrifugal Separator S11 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Centrifugal Separator S11 SIZES: 1/2”, 3/4”,1”, 11/2” and 2”. PIPE CONNECTIONS: Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to...