Energy & Process

Model:

Specification Lifting Pots LIPO OPTIONS: Stainless steel construction. USE: Condensate lines where condensate has to be lifted. SIZES: DN 15 to DN100 CONNECTIONS: Flanged EN1092-1 or ANSI. Different connections on request. CONSTRUCTION: Carbon steel or stainless steel under request. INSTALLATION: Vertical installation (inlet/outlet angle connections) The differential pressure must be enough to overcome the pressure...

FRECO – Flash steam and condensate heat recovery

Model:

Features Different kinds of materials and designs available, according to the application. Specification OPTIONS: Atmospherically vented units, to avoid extra back pressure in the condensate return system. USE: Steam, water, hot condensate and other fluids compatible with the construction. ORDER REQUIREMENTS: Condensate flow rate and temperature Make-up water flow rate and temperature Operating pressures Steam...

PAT Series Plate Heat Exchangers

Model:

Features PAT Series Plate Heat Exchangers Corrosion-resistant stainless steel plates Highly efficient heat transfer (K-values much higher comparing with shell and tube design) Less area required for installation Low liquid content Additional capacity available by fitting extra transfer plates Specification PAT Series Plate Heat Exchangers OPTIONS : Special designs and materials (titanium, etc). Brazed construction...

Pressure Reducing Valve Model P-130

Model:

Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....

Thermostatic clean steam trap Model TSS6

Model:

Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...

Pressure reducing valve Model RP45I ANSI150/300

Model:

Features Pressure reducing valve Model RP45I ANSI150/300 Specially designed high durability bellows, providing pressure balancing and friction less plug stem. Robust construction (fit-and-forget). Suitable for use with high pressure turndowns. Interchangeable actuators Specification Pressure reducing valve Model RP45I ANSI150/300 OPTIONS: Soft sealing for steam Nitrile rubber soft seated version for air and gas applications where...

Pneumatic control valves Model PV926H

Model:

Features Pneumatic control valves Model PV926H Completely made from solid bar stock material. Single seated, two way, direct or reverse action valve. Valve bonnet permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal or soft sealing. Self draining design. Specification Pneumatic control valves Model PV926H Internal wetted parts: ≤...

Sanitary pressure reducing valve P160

Model:

Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...

High purity ball valves M3HP True bore

Model:

Features High purity ball valves M3HP True bore True bore floating ball design. Completely made from solid bar stock material. Can be serviced without removal from pipeline. Bidirectional. Anti blow out proof stem. Tube weld with loose body flanges. (360º rotation after installation). ISO 5211 mounting (only sizes ≥1”). Specification High purity ball valves M3HP...

Culinary steam filter ISC16

Model:

Features Culinary steam filter ISC16 Several retention rates available. Good durability against aggressive gases. Porosity level is more than 50% ensuring high particle and dirt load capacity as well as good flow rate at a low differential pressure. Regeneration by ultrasonic bath. Specification Culinary steam filter ISC16 Internal parts: ≤ 0,76 mícron Ra – SF3....

Sample coolers SC32P – SC32PP

Model:

Features Sample coolers SC32P – SC32PP Corrosion-resistant body and internals. Self draining sample (inlet top, outlet bottom). Specification Sample coolers SC32P – SC32PP Internal wetted parts: ≤ 0,51 micron Ra – SF1. External: ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00-Technical information. Ultrasonic cleaning. OPTIONS: Different connection sizes and materials USE: ...

Clean Steam Trap TSS6A

Model:

Features Clean Steam Trap TSS6A Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design. Specification Clean Steam Trap TSS6A OPTIONS: Special designs under request USE: Saturated clean steam. AVAILABLE MODELS: TSS6A Inlet and outlet angle TSS6AI Inlet angle straight outlet TSS6AO Inlet straight outlet angle SIZES: ½” and ¾”. CONNECTIONS: ...

Safety valve Model 095AP/095ES

Model:

Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...

Safety Valve Model 496AP/496ES

Model:

Specification Safety Valve Model 496AP/496ES 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance. Materials carefully selected for their resistance to corrosion. With the exception of washers and couplings, the valves are free of non-ferric materials. Internal body designed to offer favourable flow profile. Sealing surfaces treated and balanced,...

Safety Valve Model 685

Model:

Specification Safety Valve Model 685 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance. Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Sealing surfaces balanced and making them extremely tightness, even exceeding API-527 requeriments. Great discharge capacity. For liquids typically used...

Boiler Level Controller 076-SC

Model:

Specification Boiler Level Controller 076-SC — Materials carefully selected for their resistance to wear and tear, temperature and corrosion. — Simplicity of construction ensuring minimum maintenance. — The area of connectors, terminals, magnetic switches, etc., is attached to a totally tightness base in the area in contact with the fluid. A cover of isolating temperature...

Electric Level Controller For Boller Model 176

Model:

Specification Electric Level Controller For Boller Model 176 — The electrode design is technically perfect, being fully tightness in steam, with several sealing points. — Simplicity of construction, eliminating the need for moving mechanical parts, which leads to minimum maintenance. — Materials carefully selected for their resistance to wear, temperature and pressure conditions. — Due...

Safety Valve Muffler 005

Model:

Specification Safety Valve Muffler 005 ― Small, light design. The circular shape absorbs vibrations that could cause damage over time. ― Compact, robust construction permitting liquid expansion and rises in temperature in the silencer, practically without restrictions and without producing stress in the structure. ― A diffuser consisting of a suitable combination of holes and...

Circular Transparent Lenses Model 006

Model:

Specification Circular Transparent Lenses Model 006 — Boron silicate glass of high chemical stability. — Of great purity and homogeneity. — Low thermal expansion coefficient. — Thermally prestressed which guarantees high mechanical resistance. — High resistance to sharp changes of temperature, pressure and chemical aggression, guaranteeing a long life. — Joint surfaces are perfectly flat....

Reflection And Transparency Glasses Model 066

Model:

Specification Reflection And Transparency Glasses Model 066 — Boron silicate glass of high chemical stability. — Of great purity and homogeneity. — Low thermal expansion coefficient. — Thermally prestressed which guarantees high mechanical resistance. — High resistance to sharp changes of temperature, pressure and chemical aggression, guaranteeing a long life. — Joint surfaces are perfectly...

Round-Dowel Level Indicator Model 666

Model:

Specification Round-Dowel Level Indicator Model 666 — Level gauges with replaceable floating or mobile needle seal and safety ball. Should the viewer break a pressure imbalance is caused which moves the ball onto the seating preventing the fluid from flowing out. — Gauge activation by means of a fast control lever. — Indiscriminate gauge assembly...

Blowdown Control Valves VPC-32

Model:

Features Blowdown Control Valves VPC-32 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves VPC-32 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS: Flanged EN 1092-1. ANSI Class 150 and 300 lbs....

Blowdown Control Valves Model VPC-25

Model:

Features Blowdown Control Valves Model VPC-25 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves Model VPC-25 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS: Flanged EN 1092-1. ANSI Class 150 and 300...

TDS controller Model BCS-211

Model:

Features TDS controller Model BCS-211 Compatible with both SPS-21 and SPS-33 series conductivity probes. Relay (on/off) output and 4-20 mA transmitter output. Standard 35 mm rail fixation according to DIN EN 50022 or directly screwed to chassis plate. Allows quick performance tests by pressing and holding the “TEST K” button. Read more: Blowdown Water system...

Tds Conductivity Probe In-Line Conductivity Measurement SPS-21

Model:

Specification Tds Conductivity Probe In-Line Conductivity Measurement SPS-21 OPTIONS: Flanged sensor chamber USE: Superheated boiler water and condensate SIZES: DN ½” PIPE CONNECTIONS: Screwed ISO 7/1 RP (BS21) ELECTRICAL CONNECTIONS: Plug connection with screw terminals, traction relief INSTALLATION: Horizontal or vertical installation Read more: Blowdown Water system & control

Tds Conductivity Probe Direct Boiler Conductivity Measurement Model SPS-33

Model:

Specification Tds Conductivity Probe Direct Boiler Conductivity Measurement Model SPS-33 OPTIONS: Tee piece type F-3220 for boiler and blowdown valve connection USE: Superheated boiler water and condensate SIZES: DN ½” PIPE CONNECTIONS: Screwed ISO 7/1 RP (BS21) ELECTRICAL CONNECTIONS: Plug connection with screw terminals, traction relief INSTALLATION: Horizontal or vertical installation Read more: Blowdown Water...

Humidity Separators Model S25/S or S16/S or SH25/S

Model:

Features Humidity Separators Model S25/S or S16/S or SH25/S Several possibilities of installation. No moving parts. Maintenance-free design. Specification Humidity Separators Model S25/S or S16/S or SH25/S OPTIONS: Condensate flanged connection. USE: Steam, compressed air and other gases. AVAILABLE MODELS: S25/S – carbon steel. SIZES: DN 15 to DN 300. CONNECTIONS: Flanged EN 1092-1 PN...

Humidity Separator with Strainer Model S252/F

Model:

Features Humidity Separator with Strainer Model S252/F Several possibilities of installation. No moving parts. Stainless steel strainer screen included Specification Humidity Separator with Strainer Model S252/F SIZES: DN15 to DN300. PIPE CONNECTIONS: Flanged EN1092-1 PN16 and PN40 ANSI Class 150 lbs and Class 300 lbs Female screwed BSP or NPT on request INSTALLATION: Always with...

Humidity Separator and Strainer Model SF251/S

Model:

Features Humidity Separator and Strainer Model SF251/S Several possibilities of installation. No moving parts. Stainless steel strainer screen included Specification Humidity Separator and Strainer Model SF251/S SIZES: DN15 to DN100. PIPE CONNECTIONS: Flanged EN1092-1 PN16 and PN40 ANSI Class 150 lbs and Class 300 lbs Female screwed BSP or NPT on request. INSTALLATION: Always with...

Clean Steam Separator S-10

Model:

Features Clean Steam Separator S-10 316L stainless steel construction Several possibilities of installation. No moving parts. Self draining design Specification Clean Steam Separator S-10 SIZES: DN1/2”, 3/4”,1”, 11/2” and 2” PIPE CONNECTIONS: Clamp ends or others on request INSTALLATION: Always with the condensate discharge pointing downwards. HOW TO SELECT: Generally, in an existing plant it...

Clean Steam Separator Model S-10H

Model:

Features Clean Steam Separator Model S-10H 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Separator Model S-10H SIZES: 1/2” to 3”. PIPE CONNECTIONS: Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to ISO 14644-1....

Clean Steam Centrifugal Separator S11

Model:

Features Clean Steam Centrifugal Separator S11 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Centrifugal Separator S11 SIZES: 1/2”, 3/4”,1”, 11/2” and 2”. PIPE CONNECTIONS: Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to...

Y Strainers Model IS116

Model:

Specification Y Strainers Model IS116 SIZES: DN ½” to DN 2” ; DN 15 to DN50 SCREENS: 0,8 mm aperture CONNECTIONS: Female screwed ISO 7/1 Rp (BS21) NPT (ANSI B1.20.1) Flanged EN 1092-1 or ANSI INSTALLATION: Horizontal or vertical downstream installation. See IMI, installation and maintenance instructions. PMA – Max. allowable pressure 100 bar (Cl.800lbs)...

Y Strainers Model IS16F

Model:

Specification Y Strainers Model IS16F SIZES: DN 15 to DN 300 SCREENS: 0,5 mm aperture up to DN50 1,2 mm aperture from DN 65 to DN 300 CONNECTIONS: Flanged EN 1092-2 PN16 INSTALLATION: Horizontal or vertical downstream installation. See IMI, installation and maintenance instructions. Read more: Auxiliary Pipeline

Y Strainers Model IS 140

Model:

Specification Y Strainers Model IS 140 SIZES: IS 140S – DN ½” to DN 2” IS 140I – DN ½” to DN 2”. SCREENS: 0,8 mm aperture. CONNECTIONS: Female screwed ISO 7/1 Rp (BS21). INSTALLATION: Horizontal or vertical downstream installation. Read more: Auxiliary Pipeline

Cast Steel PipeLine T Strainers Model IS140T

Model:

Specification Cast Steel PipeLine T Strainers Model IS140T SIZES: DN 15 to DN 100 SCREENS: 0,5 mm aperture up to DN 25 1,5 mm aperture from DN 32 to DN 80 2 mm aperture DN 100 CONNECTIONS: Flanged EN 1092-1 PN40 INSTALLATION: Horizontal or vertical installation. Read more: Auxiliary Pipeline

FC/FD Series Mini Float Level Switch

Model:

Features FC/FD Series Mini Float Level Switch Simple, compact design with high reliability Low cost Various mounting options Different types of connections Application: fountain, machinery, electricity, chemical, washing machine, air conditioner, hydraulic machine Specification FC/FD Series Mini Float Level Switch Read more: Liquid Level Switch

FC/FD Series Magnetic Float Level Switch

Model:

Features FC/FD Series Magnetic Float Level Switch Multiple points measuring, multiple level points could be for custom-made. Employing the magnet to actuate the reed switch requires no power. Life expectancy of each contact can reach up to 2 million times. All output signal wiring are simplified in same junction box (housing) to economize the external...

FF Side Mounting Float Switch

Model:

Features FF Side Mounting Float Switch The side mounted float level sensor (FF series) are manufactured specifically for horizontal mounting on tanks or vessels. They work well as high or low level controls. 1. Both Micro-Switch types and Reed Switches are available. The MicroSwitch type is usable even at ambient temperatures of 100° C maximum....

Zetkama Safety valve 630

Model:

Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...

6 lý do nên chọn Ecozen

Giải pháp IoT

Bài viết liên quan

Hỗ trợ kỹ thuật / tư vấn báo giá

0901 19 06 08

Energy & Process

Energy & Process

6 lý do nên chọn Ecozen

Giải pháp IoT

Bài viết liên quan

Hỗ trợ kỹ thuật / tư vấn báo giá

0901 19 06 08

Login

Register