Filter

Thermostatic Steam Trap Model TH21SS, TH21/2SS

Thông tin cơ bản

Tư vấn sản phẩm/hỗ trợ kỹ thuật

Email: contact@eco-genergy.com

Hotline: 0901 19 06 08

Báo giá Tải Catalog

Features Thermostatic Steam Trap Model TH21SS, TH21/2SS

  • Modulating discharge.
  • Discharges condensate close to steam temperature.
  • Thermostats for different sub cooling (5ºK to 30ºK).
  • Excellent air discharge .
  • Operates on moderate superheated steam.
  • Built-in strainer.

Specification Thermostatic Steam Trap Model TH21SS, TH21/2SS

  • SIZES: DN ½” to DN 1” ; DN15 to DN25
  • CONNECTIONS:
    • Female screwed ISO 7/1 Rp (BS21)
    • Flanged EN 1092-1 PN40 or ANSI
  • INSTALLATION: Horizontal installation recommended, can be installed in any position.
  • PMO – Max. op.pressure 21 bar;TMO – Max. Op.temperature 250 ºC
    * According to EN1092-1:2007 ; ** Acc. to EN1759-1:2004
  • Body limiting conditions PN40 or below, depending on the type of connection adopted. Rating PN40 for thread.

Read More: Bimetallic Steam Trap

Nút download

Sản phẩm tương tự

Related products

Manual Blowdown Valve Model VPA26S

Manual Blowdown Valve Model VPA26S

Model:

Features Manual Blowdown Valve Model VPA26S High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Manual Blowdown Valve Model VPA26S Manual or automatic control. Size: DN20 – DN50 Connection: flange Working pressure: PN40 Maximum temperature: 400ºC Read More: Steam...

Zetkama Safety valve 630

Zetkama Safety valve 630

Model:

Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...

Van giảm áp dạng màng – High Accuracy Pressure Reducing Valve Model PRV300SS

High Accuracy Pressure Reducing Valve Model PRV300SS

Model:

Van 3 ngã điều khiển bằng khí nén Genebre Model 5040

Pneumatic Control 3 ways ball valve Genebre Model 5040

Model:

Features Pneumatic Control 3 ways ball valve Genebre Model 5040 – Extruded aluminium ASTM6005 body with internal surface having honed cylinder for longer life and low friction coefficient, and both internal and external corrosion protection treated with hard anodized and the external blue powder polyester painted. – Dual piston rack and pinion design for compact...

VAN BI ĐIỀU KHIỂN KHÍ NÉN

Pneumatic Control Ball Valve Genebre Model 5025

Model:

Pneumatic Control Ball Valve Genebre Model 5025 Material: Stainless Steel Size: DN15 – DN50 Connection: Threaded Maximum pressure: 63bar Operating Temperature: -25 ~ 180ºC Read More: Pneumatic control valves

Van giảm áp trực tiếp – Stainless Steel Dir.Acting Pressure Reducing Valve Model PRV252SS

Stainless Steel Dir.Acting Pressure Reducing Valve Model PRV252SS

Model:

Features Stainless Steel Dir.Acting Pressure Reducing Valve Model PRV252SS Compact design. Bellows specially designed for high durability. Built-in strainer. Specification Stainless Steel Dir.Acting Pressure Reducing Valve Model PRV252SS Size: ½”, ¾”, 1” – DN15, DN20, DN25 Connection Female screwed ISO7/1Rp (BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum temperature: 210ºC...

Van giảm áp – Pressure Reducing Valve Model P20P

Pressure Reducing Valve Model P20P

Model:

Features Pressure Reducing Valve Model P20P Compact design. Machined from barstock materials No rising handwheel Ultrasonically cleaned and degreased Specification Pressure Reducing Valve Model P20P Size: 1/4″ Connection Female screwed ISO7/1Rp(BS 21) or NPT. Special connections on request Working pressure: PN320 Maximum temperature: 80ºC INSTALLATION: In any position Read More: Steam Products ADCA

Van cầu hơi Zetkama 234

Zetkama Bellow valve 234

Model:

Feature Zetkama Bellow valve 234 High thightness (leakproofness class – A acc. EN -12266 – 1) Compact settlement Environment-friendly Tests acc. EN – 12266 – 1 Flanges drilled according to EN 1092-2 for body material A, C Flanges drilled according to EN 1092-1 for body material F Face-to-face dimension according to EN 558-1 series 1...

Van xả TDS Adca Model VPC-25

Blowdown Control Valves Model VPC-25

Model:

Features Blowdown Control Valves Model VPC-25 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves Model VPC-25 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS:  Flanged EN 1092-1. ANSI Class 150 and 300...

Van xả TDS Adca Model VPC-32

Blowdown Control Valves VPC-32

Model:

Features Blowdown Control Valves VPC-32 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves VPC-32   VALVE SIZES: DN15,20,25 and 40. CONNECTIONS:  Flanged EN 1092-1. ANSI Class 150 and 300 lbs....

Van điều khiển khí nén dạng màng, áp suất cao ADCA

Pneumatic Control Valves Model PA45

Model:

Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...

Van xả cặn lò hơi Adca Model VPA26

Blowdown valve for Boiler Model VPA26

Model:

Features Blowdown valve for Boiler Model VPA26 High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Blowdown valve for Boiler Model VPA26 Read More: Steam Boiler Blowdown Valves

Van giảm áp trực tiếp – Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Model:

Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...

Van giảm áp dạng màng – Pressure Reducing Valve PRV30SS

Pressure Reducing Valve PRV30SS

Model:

Bẫy hơi nhiệt tĩnh vi sinh Adca Model TSS6

Thermostatic clean steam trap Model TSS6

Model:

Features Thermostatic clean steam trap Model TSS6 Modulating discharge. Wide range of connections options Excellent air discharge. Simple and compact design Specification Thermostatic clean steam trap Model TSS6 OPTIONS: Special designs under request. Different standard connection. USE: Saturated clean steam. SIZES: ½” to 11/2” ; DN8 to DN25. CONNECTIONS: ASME BPE, DIN and ISO. Clamp...

Automatic Blowdown Valve Model VPA26S

Automatic Blowdown Valve Model VPA26S

Model:

Features Automatic Blowdown Valve Model VPA26S High-quality hardened valve seat and plug. Manual or automatic intermittent timed control. Lockable in open position if supplied with manual operation lever. Practical foot operated lever. Maintenance free stem sealing. Tool-free quick exchangeable clamped-in seats, allowing fast and easy in-site maintenance procedures. Specification Automatic Blowdown Valve Model VPA26S Manual...

Kính thủy lò hơi VYC Model 666

Round-Dowel Level Indicator Model 666

Model:

Specification Round-Dowel Level Indicator Model 666 — Level gauges with replaceable floating or mobile needle seal and safety ball. Should the viewer break a pressure imbalance is caused which moves the ball onto the seating preventing the fluid from flowing out. — Gauge activation by means of a fast control lever. — Indiscriminate gauge assembly...

Van an toàn VYC Model 095ES cho nước, khí - Safety valve Model 095AP/095ES

Safety valve Model 095AP/095ES

Model:

Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...

Van góc điều khiển khí nén ADCA

Pneumatic Angle Type Interception Valve Model PAV21

Model:

Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...

Van cầu inox Genebre Model 2230

Globe valve 2230

Model:

Features Globe valve 2230 1. Globe valve. 2. Made of Stainless Steel 1.4408 (CF8M). 3. Compact disc made of S. Steel 316. 4. Threaded ends according ISO 7-1 (EN 10226-1). 5. Stem Packing PTFE. 6. Max. Working pressure 16 bar. 7. Max. Working temperature 180 ºC. Read More: Steam Products ADCA

Hỗ trợ kỹ thuật / tư vấn báo giá

0901 19 06 08

    Chat Zalo
    Gọi 0901 19 06 08