Filter

Pressure reducing valve Model RP45I ANSI150/300

Thông tin cơ bản

Tư vấn sản phẩm/hỗ trợ kỹ thuật

Email: contact@eco-genergy.com

Hotline: 0901 19 06 08

Báo giá Tải Catalog

Features Pressure reducing valve Model RP45I ANSI150/300

  • Specially designed high durability bellows, providing pressure balancing and friction less plug stem.
  • Robust construction (fit-and-forget).
  • Suitable for use with high pressure turndowns.
  • Interchangeable actuators

Specification Pressure reducing valve Model RP45I ANSI150/300

  • OPTIONS:
    • Soft sealing for steam
    • Nitrile rubber soft seated version for air and gas applications where tight shut-off is required.
    • Low-noise flow divider
  • USE: Steam, compressed air and other gases and liquids compatible with the construction.
  • AVAILABLE MODELS:
    • RP45G and RP45GT or N – PN16 Cast steel
    • RP45S and RP45ST or N – PN40 Cast steel
    • RP45I and RP45IT or N – Stainless Steel
    • (All wetted parts free of non-ferrous metal or in St.Steel.).
    • Suffix T : Soft seated with PTFE/GR
    • Suffix N : soft seated with nitrile rubber
  • SIZES: DN 15 to DN 100
  • CONNECTIONS INSTALLATION:
    • Horizontal installation.
    • An “Y” strainer, steam separator and steam trap should be provided upstream the valve.
    • See IMI, installation and maintenance instructions.

Read More: Sanitary valves

Nút download

Sản phẩm tương tự

Related products

Van điều khiển khí nén dạng màng, áp suất cao ADCA

Pneumatic Control Valves Model PA45

Model:

Features Pneumatic Control Valves Model PA45 Direct and reverse action actuators for maximum 50mm valve stroke. Operation with compressed air, nitrogen or clean water. Specification Pneumatic Control Valves Model PA45 CONNECTION: DN ¼” AIR SUPPLY: Max. 6 bar MAX.AMBIENT TEMPERATURE: -20 ºC to 80 ºC OPTIONS: Limit switches Manual operating device Different kind of positioners...

Van điều khiển khí nén ON/OFF dạng màng Adca Model PV25G

ON-OFF Diaphragm Pneumatic Control Valve Model PV25G

Model:

Features ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification ON-OFF Diaphragm Pneumatic Control Valve Model PV25G Read More: Pneumatic control valves

Van giảm áp dạng piston – Piston Sensing Pressure Reducing Valve Model PRV31SS

Piston Sensing Pressure Reducing Valve Model PRV31SS

Model:

Features Piston Sensing Pressure Reducing Valve Model PRV31SS Compact design. Balanced valve plug. Machined from bar stock materials or investment casting. Specification Piston Sensing Pressure Reducing Valve Model PRV31SS Size: 1/2” and 3/4”; DN15 – DN50 Connection Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40 or PN 63. Flanged ASME B16.5...

Van điều khiển khí nén ADCA

Pneumatic Control Valves Model PV16G

Model:

Features Pneumatic Control Valves Model PV16G Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic Control Valves Model PV16G Read More: Pneumatic control valves

Van giảm áp dạng màng – High Accuracy Pressure Reducing Valve Model PRV300SS

High Accuracy Pressure Reducing Valve Model PRV300SS

Model:

Van xả cặn lò hơi Adca Model VPA26

Blowdown valve for Boiler Model VPA26

Model:

Features Blowdown valve for Boiler Model VPA26 High quality hardened valve and seat. Manual or automatic control. Can be locked in the open position if supplied with the manual operation lever. Specification Blowdown valve for Boiler Model VPA26 Read More: Steam Boiler Blowdown Valves

Van giảm áp vi sinh Adca Model P-130

Pressure Reducing Valve Model P-130

Model:

Features Pressure Reducing Valve Model P-130 Compact design. Completely machined from 316L stainless steel barstock, no castings or forgings are used. FDA / USP Class VI compliant seals. No rising stem. Specification Pressure Reducing Valve Model P-130 OPTIONS: Self relieving. Leakage line connection 1/8” (captured vent). Panel mounting version (thread M45). Gauge connection on body....

Điều khiển mức nước lò hơi VYC Model 176

Electric Level Controller For Boller Model 176

Model:

Specification Electric Level Controller For Boller Model 176 — The electrode design is technically perfect, being fully tightness in steam, with several sealing points. — Simplicity of construction, eliminating the need for moving mechanical parts, which leads to minimum maintenance. — Materials carefully selected for their resistance to wear, temperature and pressure conditions. — Due...

Van xả TDS Adca Model VPC-25

Blowdown Control Valves Model VPC-25

Model:

Features Blowdown Control Valves Model VPC-25 Single seated, two way, direct action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Metal to metal hardened sealing as standard. Specification Blowdown Control Valves Model VPC-25 VALVE SIZES: DN15,20,25 and 40. CONNECTIONS:  Flanged EN 1092-1. ANSI Class 150 and 300...

Pneumatic valve control output Model PV25G

Pneumatic valve control output Model PV25G

Model:

Features Pneumatic valve control output Model PV25G Single seated, two way, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Soft sealing as standard. Specification Pneumatic valve control output Model PV25G Size: DN15 – DN50 Connection: Flanged EN1092-1/-2 PN16 Maximum pressure: PN16 Maximum temperature:...

Van giảm áp dạng màng – Diaphragm Sensing Pressure Sustaining Valve PS15SS

Diaphragm Sensing Pressure Sustaining Valve PS15SS

Model:

Features Diaphragm Sensing Pressure Sustaining Valve PS15SS Compact design. Machined from barstock materials. Specification Diaphragm Sensing Pressure Sustaining Valve PS15SS Size: DN8 – DN15 Connection Female screwed ISO7/1Rp(BS 21) or NPT. Flanged EN 1092-1 PN16/PN40 Special flanges upon request Working pressure: PN63 Maximum temperature: 80ºC Installation: Horizontal ORDER REQUIREMENTS: Type of fluid Read More: Steam...

Zetkama Safety valve 630

Zetkama Safety valve 630

Model:

Features Zetkama Safety valve 630 Flanges dimention according to PN EN 1092 Valves made according to PN EN ISO 4126-1 High tightness for valve with soft sealing Quiet work of valve Raised tightness of closure Protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt Read more: Boiler...

Van góc điều khiển khí nén ADCA

Pneumatic Angle Type Interception Valve Model PAV21

Model:

Features Pneumatic Angle Type Interception Valve Model PAV21 Stainless steel body with high coefficient of flow. Resistance to corrosion Low air consumption Nylon rotational servo control Self-centring plug with soft sealing Live loading packing gland Specification Pneumatic Angle Type Interception Valve Model PAV21 Size: DN ½” – DN 2” Connection: Threaded ISO Body design conditions:...

Van điều khiển bằng khí nén ADCA

Pneumatic Control Valves Model PWV40I

Model:

Features Pneumatic Control Valves Model PWV40I Single seated, two ways, direct or reverse action valve. Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator. Stainless steel construction and soft sealing as standard. Specification Pneumatic Control Valves Model PWV40I Read More: Pneumatic control valves

Van an toàn VYC Model 095ES cho nước, khí - Safety valve Model 095AP/095ES

Safety valve Model 095AP/095ES

Model:

Specification Safety valve Model 095AP/095ES Model AP open cap with lever. Model ES closed cap without lever. 90° angular flow. Activated by direct action helicoid spring. Simplicity of construction ensuring minimum maintenance.s Materials carefully selected for their resistance to corrosion. Internal body designed to offer favourable flow profile. Seat and sealing disk balanced, making them...

Kính thủy lò hơi VYC Model 666

Round-Dowel Level Indicator Model 666

Model:

Specification Round-Dowel Level Indicator Model 666 — Level gauges with replaceable floating or mobile needle seal and safety ball. Should the viewer break a pressure imbalance is caused which moves the ball onto the seating preventing the fluid from flowing out. — Gauge activation by means of a fast control lever. — Indiscriminate gauge assembly...

Van giảm áp vi sinh ADCA - Sanitary pressure reducing valve P160

Sanitary pressure reducing valve P160

Model:

Features Sanitary pressure reducing valve P160 Compact design. Completely machined from barstock material, no castings or forgings are used on the standard version. No rising stem. Specification Sanitary pressure reducing valve P160 Internal wetted parts: ≤ 0,51 micron Ra – SF1. External : ≤ 0,76 micron Ra – SF3. Other surface conditions see IS PV20.00...

Pneumatic Control Valves Model PPV25G

Pneumatic Control Valves Model PPV25G

Model:

Features Pneumatic Control Valves Model PPV25G Single seated, two ways, direct or reverse action valve. Soft sealing as standard. Actuator housing 360º rotation (clockwise). Specification Pneumatic Control Valves Model PPV25G Size: DN15 – DN50 Connection: Flanged EN1092-2 PN16 Maximum pressure: PN16 Maximum temperature: 300ºC Read More: Pneumatic Shut-off Valves (On/Off)

Van giảm áp trực tiếp – Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I

Model:

Features Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Compact design. Bellows specially designed for high durability. Built-in strainer Specification Stainless Steel Dir.Acting Pressure Reducing Valves Model PRV25I Size: ½”, ¾”, 1”; DN15, DN 20, DN25 Connection Female screwed ISO7/1Rp(BS 21) . Flanged EN 1092-1 PN40 or ANSI. Working pressure: PN25 Maximum operating temperature: 210°C...

Bộ tách ẩm vi sinh ADCA - Clean Steam Separator Model S-10H

Clean Steam Separator Model S-10H

Model:

Features Clean Steam Separator Model S-10H 316L stainless steel construction. No moving parts. Self draining design. Specification Clean Steam Separator Model S-10H SIZES: 1/2” to 3”.  PIPE CONNECTIONS:  Clamped ends ASME BPE. Other sanitary clamp or tube weld connections available on request. PACKAGING: Assembling and packaging in a clean room certified according to ISO 14644-1....

Hỗ trợ kỹ thuật / tư vấn báo giá

0901 19 06 08

    Chat Zalo
    Gọi 0901 19 06 08