Mô tả công tắc báo lệch băng tải SRT Finetek: 

This device monitors the operation process for
potentially hazardous conditions and activate an
alarm when it is occurred misalignment, the SRT
series conveyor belt misalignment switch protects
the conveyor belt from damage due to belt
misalignment or run off。
For normal condition, the belt misalignment
switches are generally mounted on both sides and
the edge of the conveyor belt。
A small clearance between the contact rollers and
a little swaying for the belt edges are allowable.
When the swaying exceeds the normal limit
(on/ about 20 mm), the belt edge pushes the
contact roller, which drives the switch and operates
the contacts, the misalignment switch will reset
automatically when the belt resumes normal running.
These control devices are used in pair on both
side of conveyor belt detected place, each unit can
be equipped with two micro-switches to produce
signals indicating the belt misalignment at two
deviation points。
The first signal point could indicate small belt
deviation by output an alarm, the second signal
point could guard against extreme belt run off by
shutting down the conveyor。
The roller is adjustable up to 20 in both directions
and is positioned approximately 20mm from the
conveyor belt , the switch actuation points are
adjustable from 0 to 35 by a simple change of
the actuating cams。

Tính năng và đặc điểm của công tắc báo lệch băng tải Finetek SRT:

Easy Installation, operation sensitive
Roller arm can move up to 75 degrees in either
direction
Dust tight, IP 67 weatherproof, Die cast
aluminum housing
Roller lever actuating angle 20 for alarm signal
and 35° for shutting down system
To Save Process downtime, product loss and
replacing cost of damaged conveyor belt
SRT-170, Explosion-proof
°
Ex tD A21 IP67 T85BC

Ứng dụng của công tắc báo lệch băng tải SRT Finetek:

Conventional Belt Conveyors
Underground, Cable Supported Belt Conveyors
Stacker / Reclaimer Conveyors
Ship Loading / Unloading Systems
Tripper and Shuttle Conveyors
Crane / Shovel Boom Position Limit Detector
Apron Feeders & Conveyors
Heavy Duty Limit Switch

Thông số kỹ thuật của công tắc báo lệch băng tải Finetek SRT:

Dimension của công tắc báo lệch băng tải SRT Finetek:

Theo dõi Fanpage và tham khảo thêm về nhà sản xuất hàng đầu Finetek - tại đây!